Section 1M, IRIX 6.5

521 pages.

accept(1M) accept, reject - allow or prevent LP requests
acct(1M) acct: acctdisk, acctdusg, accton, acctwtmp closewtmp, utmp2wtmp - overview of accounting and miscellaneous accounting commands
acctcms(1M) acctcms - command summary from per-process accounting records
acctcon(1M) acctcon, acctcon1, acctcon2 - connect-time accounting
acctmerg(1M) acctmerg - merge or add total accounting files
acctprc(1M) acctprc, acctprc1, acctprc2 - process accounting
acctsh(1M) acctsh: chargefee, ckpacct, dodisk, lastlogin, monacct, nulladm, prctmp, prdaily, prtacct, shutacct, startup, turnacct - shell procedures for accounting
addclient(1M) addclient - allow remote printing clients to connect
adddefpriv(1M) adddefpriv - add a default system administration privilege to the system
addexportsentry(1M) addexportsentry - add an entry into /etc/exports file.
addfstabentry(1M) addfstabentry - add a filesystem entry into the /etc/fstab file.
addhost(1M) addhost - add and modify an entry in the host file.
addLocalFileSwap(1M) addLocalFileSwap - adds swap space from a local filesystem
addModem(1M) addModem - add a modem to the system
addpppin(1M) addpppin - add a PPP incoming entry.
addpppout(1M) addpppout - add a PPP outgoing entry.
addpriv(1M) addpriv - add a privilege to the system administration privilege database
addprivuser(1M) addprivuser - give a user all system administration privileges
addSerialDevice(1M) addSerialDevice - add a serial device to the system
addUserAccount(1M) addUserAccount - add a user account to the system
addVirtualSwap(1M) addVirtualSwap - adds virtual swap space
addzone(1M) /usr/etc/appletalk/addzone - add a zone to a specific interface
amconfig(1M) amconfig - check or modify availmon configuration values
amnotify(1M) amnotify - email availability and diagnosis reports
amparse(1M) amparse - extract information from an availmon report
amreceive(1M) amreceive - convert received availmon email reports
amregister(1M) amregister - register or deregister the system
amreport(1M) amreport - produce statistical and event reports from availmon logfile
amsend(1M) amsend - mail availmon reports
amsysinfo(1M) amsysinfo - print system serial number or full hostname/address
amsyslog(1M) amsyslog - parse system log files and print critical messages
amtickerd(1M) amtickerd - system uptime monitor daemon
amtime1970(1M) amtime1970 - print or convert time as seconds since Jan 1, 1970
aremex(1m) aremex - array serivces remote execution monitor
arp(1M) arp - address resolution display and control
arrayconfig(1m) arrayconfig - configure a simple array
arrayd(1m) arrayd - array services daemon
atconfig(1M) /usr/etc/appletalk/atconfig - enable AppleTalk on an interface
atinit(1M) atinit - halt, start, or restart AppleTalk services
atping(1M) atping - ping an AppleTalk node
attrinit(1M) attrinit - Set file attributes
audit(1M) audit - system audit trail startup and shutdown script
autoconfig(1M) autoconfig - configure kernel
autofs(1M) autofs - install automatic mount points
autofsd(1M) autofsd - AutoFS mount/unmount daemon
automount(1M) automount - automatically mount NFS filesystems
autopush(1M) autopush - configure lists of automatically pushed STREAMS modules
backup(1M) backup - backup files and directories now, later, or recurring
BackupAndRestoreManager(1M) BackupAndRestoreManager - Shedule or Unschedule Backups, Restore Files
bootp(1M) bootp - server for Internet Bootstrap Protocol
bootparamd(1M) bootparamd - boot parameter server
brc(1M) brc, bcheckrc - system initialization procedures
buildppd(1M) buildppd - build a PPD file for a printer
cached(1M) cached - monitor single bit secondary cache errors.
canonhost(1M) canonhost - canonicalize hostnames
captoinfo(1M) captoinfo - convert a termcap description into a terminfo description
cfsadmin(1M) cfsadmin - administer disk space used for caching file systems with the Cache File-System (CacheFS)
cfsstat(1M) cfsstat - display Network File System statistics
checkPassword(1M) checkPassword - confirm a user password
checkpriv(1M) checkpriv - check to see if the current user is privileged
chkconfig(1M) chkconfig - configuration state checker
chkutent(1M) chkutent - check and repair utmp entries
chroot(1M) chroot - change root directory for a command
chrtbl(1M) chrtbl - generate character classification and conversion tables
cl_init(1M) cl_init - init program for diskless software installation
cleanpowerdown(1M) cleanpowerdown - control the power-down behavior of Onyx/Challenge L/XL systems
clri(1M) clri - clear EFS inode
clshm_diag(1M) clshm_diag - Diagnostic tool for CrayLink Shared Memory
clshmctl(1M) clshmctl - Administration tool for CrayLink Shared Memory
clshmd(1M) clshmd - Daemon for inter-partition shared-memory communication over CrayLink.
colltbl(1M) colltbl - create collation database
confidence(1M) confidence - Desktop Confidence Tests
configAutoLogin(1M) configAutoLogin - enable or disable auto login
configdefaultRoute(1M) configdefaultroute - add or delete a default route
configec0state(1M) configec0state - activate or deactivate the primary interface
configipforwardstate(1M) configipforwardstate - turn IP forwarding on or off
configkfs(1M) configkfs - configuration program for AppleShare Client
configks(1M) configks - configuration program for K-Spool
configmail(1M) configmail - sendmail autoconfiguration script
configNetIf(1M) configNetIf - configure the network interfaces
configResolver(1M) configResolver - updates the host resolution order.
cpumeter(1M) cpumeter - control the CPU activity meter on the Onyx/Challenge L/XL LCD panel
cron(1M) cron - clock daemon
cvconnect(1M) cvconnect - The WorkShop Debugger Connection Helper
cvpcs(1M) cvpcs - The WorkShop Debugger Server
cvpcsd(1M) cvpcsd - The WorkShop Debugger Server Daemon
dalw(1M) dalw - development application laser writer ( lpr(1) only)
dd(1M) dd - convert and copy a file
deletehost(1M) deletehost - delete an entry from the host file.
deleteModem(1M) deleteModem - delete a modem from the system
deleteSerialDevice(1M) deleteSerialDevice - deletes a serial device from the system
deleteUserAccount(1M) deleteUserAccount - delete a user account from the system
devnm(1M) devnm - device name
dgld(1M) dgld - Graphics Library server
dhcp_bootp(1M) dhcp_bootp - proclaim server for Dynamic Host Configuration Protocol
dhcp_relay(1M) dhcp_relay - proclaim relay-agent for Dynamic Host Configuration Protocol
diagsetup(1M) diagsetup - control the contents of the diag user's running of cached and onlinediag
DiskManager(1M) DiskManager - view and manager fixed disks
diskpatch(1M) diskpatch - prevent stiction problems with some disk drives
diskusg(1M) diskusg - generate disk accounting data by user ID
distcp(1M) distcp - copy or compare software distributions
dtrebuild(1M) dtrebuild - ``desktop'' maintenance of AppleShare volumes
dtshutdown(1M) dtshutdown - Notify desktop and shutdown the system
du(1M) du - summarize disk usage
dump(1M) dump, rdump - incremental filesystem backup for EFS filesystems
dvhtool(1M) dvhtool - modify and obtain disk volume header information
dynaweb(1M) dynaweb - Inso Technology's IRIS InSight Dynaweb Server Extension
edquota(1M) edquota - edit user quotas
epd(1M) epd - AppleTalk Echo Protocol daemon
epfirm(1M) epfirm - maintain E-Plex 8-port Ethernet Firmware
execisdnd(1M) execisdnd - run ISDN deamon.
execppp(1M) execppp - Start a PPP call.
exportfs(1M) exportfs - export and unexport directories to NFS clients
EZsetup(1M) EZsetup - login for basic system setup and user environment configuration
fam(1M) fam - file alteration monitor
fcagent(1m) fcagent - FibreVault Status/Configuration daemon
fccli(1m) fccli - FibreVault Status/Configuration Command Line Interface
fddivis(1M) fddivis - graphically display FDDI ring
fdetach(1M) fdetach - detach a name from a STREAMS-based file descriptor
FilesystemManager(1M) FilesystemManager - view and manage filesystems
findblk(1M) findblk - find filesystem block
fingerd(1M) fingerd - remote user information server
flash(1M) flash - reprogram the flash PROM hardware on Origin and OCTANE machines
flashio(1M) flashio - reprogram the flash PROM hardware on Everest-based machines
flashmmsc(1M) flashmmsc - reprogram the MMSC on Origin2000 systems
formatRMedia(1M) formatRMedia - Formats removable media
fpck(1M) fpck - check and repair either FAT (MSDOS) or HFS (MACINTOSH) filesystems
fru(1M) fru - Field replacement unit analyzer for Challenge/Onyx systems
fsck(1M) fsck - check and repair filesystems for EFS
fsdb(1M) fsdb - filesystem debugger for EFS
fsdump(1M) fsdump - file system dumper for rfindd for EFS and XFS
fsr(1M) fsr - filesystem reorganizer for EFS
fsstat(1M) fsstat - report filesystem status
fstyp(1M) fstyp - determine filesystem identifier
ftpd(1M) ftpd - Internet File Transfer Protocol server
fuser(1M) fuser - identify processes using a file or file structure
fwtmp(1M) fwtmp, wtmpfix - manipulate connect accounting records
fx(1M) fx - disk utility
gated(1M) gated - gateway routing daemon
gendist(1M) gendist - generate a software distribution
genperm(1M) genperm - generate /etc/uucp/Permissions
getallpppinisdn(1M) getallpppinisdn - get all PPP incoming ISDN entries
getallpppinmodem(1M) getallpppinmodem - get all PPP incoming modem entries
getallpppoutisdn(1M) getallpppoutisdn - get all PPP outgoing ISDN entries
getallpppoutmodem(1M) getallpppoutmodem - get all PPP outgoing modem entries
getDiskInfo(1M) getDiskInfo - lists information about fixed disks
getDiskParts(1M) getDiskParts - gets a disk's partition information
getExportList(1M) getExportList - get list of nfs exported directories from a remote sytem
getipforwarding(1M) getipforwarding - get ipforwarding state using systune
getjavafrompref(1M) getjavafrompref - get the state of Java or JavaScript
getsomeaccounts(1M) getsomeaccounts - get the user accounts that have no password or get active accounts
getty(1M) getty - set terminal type, modes, speed, and line discipline
ggd(1M) ggd - rate-guarantee-granting daemon
grio(1M) grio - display GRIO reservation information
grio_bandwidth(1M) grio_bandwidth - determines guaranteed-rate I/O device bandwidth
growfs(1M) growfs - expand a filesystem
grpck(1M) grpck - group file checker
halt(1M) halt - halt the system
hinv(1M) hinv - hardware inventory command
HostManager(1M) HostManager - Host Manager
icrash(1M) icrash - IRIX system crash analysis utility
id(1M) id - print the user name and ID, and group name and ID
idbg(1M) idbg - kernel debugger print utility
ifconfig(1M) ifconfig - configure network interface parameters
iflabel(1M) iflabel - configure network interface attributes
imdmonitor(1M) imdmonitor - daemon that monitors filesystems and launches alerts
inetd(1M) inetd - Internet ``super-server''
infocmp(1M) infocmp - compare or print out terminfo descriptions
init(1M) init, telinit - process control initialization
initDisk(1M) initDisk - initializes disk and partitions is as an option disk
inst(1M) inst - software installation tool
installf(1M) [a_man] installf - add a file to the software installation database
intro(1M) intro - introduction to maintenance commands and application programs
ioconfig(1M) ioconfig - configure I/O devices
ipfilterd(1M) ipfilterd - IP packet filtering daemon
ipld(1M) ipld - creates a composite locale.
ipxdebug(1M) ipxdebug - enable or disable diagnostic output from IPX
ipxlink(1m) ipxlink - Link ipx streams driver to Link Layer
ipxstat(1M) ipxstat - display IPX statistics
isdnd(1M) isdnd - ISDN Daemon
IsdnManager(1M) IsdnManager - ISDN Manager
isdnstat(1M) isdnstat - show ISDN connection status
itester(1M) itester - ISDN test and development tool
kbdcomp(1M) kbdcomp - compile code set and keyboard map tables
kbdload(1M) kbdload - load or link kbd tables
killall(1M) killall - kill named processes
killautofs(1M) killautofs - stop autofs deamon.
killautomount(1M) killautomount - kill automount deamon.
klogpp(1M) klogpp - kernel /dev/log post-processor
ksd(1M) ksd - AppleShare file server
ksd_msg(1M) ksd_msg - send a message to K-AShare users
ksd_restart(1M) ksd_restart - halt/restart the K-AShare daemon
labelit(1M) labelit - provide labels for file systems
lboot(1M) lboot - configure bootable kernel
LicenseManager(1M) LicenseManager - view and manage FLEXlm and NetLS software licenses
link(1M) link, unlink - link and unlink files
listAllDiskFS(1M) listAllDiskFS - lists all filesystems on local disks
listen(1M) listen - network listener port monitor
listPrinters(1M) listPrinters - get list of printers from a remote system
listRootBackups(1M) listRootBackups - get the list of backups scheduled by the super-user
lltune(1M) lltune - Sends/receives lapb or llc2 tuning parameters to/from their respective drivers.
lockd(1M) lockd - NFS lock daemon
lpadmin(1M) lpadmin - configure the LP spooling system
lpc(1M) lpc - BSD line printer control program
lpd(1M) lpd - BSD line printer daemon
lpqserver(1M) lpqserver - service requests from the Macintosh K-Spool Monitor desk accessory
lpsched(1M) lpsched, lpshut, lpmove - start/stop the LP scheduler and move requests
lv_to_xlv(1M) lv_to_xlv - generate a script for converting from lv to XLV
mailstats(1m) mailstats - display mail statistics
makedbm(1M) makedbm - make an NIS dbm file
makedev(1M) MAKEDEV - create device special files
makemap(1m) makemap - create database maps for sendmail
makewhatis(1M) makewhatis, manwhat - make manual page "whatis" database for use with apropos
mdbm_remove(1M) mdbm_remove - invalidate and remove mdbm files
mediad(1M) mediad - removable media daemon
mkalias(1M) mkalias - NIS mail alias tool
mkboottape(1M) mkboottape - make a boot tape filesystem
mkbsdnetpr(1M) mkbsdnetpr - provide access to a remote printer using the BSD printing protocols
mkbsdpr(1M) mkbsdpr - register a BSD printer with LP
mkcentpr(1M) mkcentpr - install a parallel (Centronics) interface System V printer
mkfifo(1M) mkfifo - make FIFO special file
mkfile(1M) mkfile - create a file
mkfp(1M) mkfp - construct a FAT (MSDOS) or HFS (MACINTOSH) filesystem
mkfs(1M) mkfs - construct a filesystem
mkfs_efs(1M) mkfs_efs - construct an EFS filesystem
mkfs_xfs(1M) mkfs_xfs - construct an XFS filesystem
mkfsXfs(1M) mkfsXfs - calls mkfs_xfs to create an xfs filesystem
mkjtpr(1M) mkjtpr - install a network printer interface System V printer
mknetpr(1M) mknetpr - provide access to a remote printer
mknod(1M) mknod - build special file or named pipe (FIFO)
mkpart(1M) mkpart - Partition Configuration Tool for Origin
mkscsipr(1M) mkscsipr - installs a SCSI interface System V printer
mkserialpr(1M) mkserialpr - install a serial interface System V printer
ml(1M) ml - load dynamic kernel modules
mmscd(1M) mmscd - communicates with MMSC (including front panel display) on Origin2000 and Onyx2 rack systems
mntproc(1M) mntproc - mount the /proc filesystem
modelinfo(1M) modelinfo - generate formatted list of supported printers
modifyPermissionsAndOwnership(1M) modifyPermissionsAndOwnership - modify permissions and ownership of files
modifyUserAccount(1M) modifyUserAccount - modify an existing user account
modinfofltr(1M) modinfofltr - format and filter the /var/spool/lp/modelinfo.dat file
monitorRemovableMedia(1M) monitorRemovableMedia - enable mediad monitoring of a device
montbl(1M) montbl - create monetary database
mount(1M) mount, umount - mount and unmount filesystems
mount_kfs(1M) mount_kfs, umount_kfs - AppleShare mounter
mountall(1M) mountall - mount multiple filesystems
mountd(1M) mountd - NFS mount request server
mountfs(1M) mountfs - mounts a filesystem.
mrouted(1M) mrouted - IP multicast routing daemon
mtrace(1M) mtrace - print multicast path from a source to a receiver
mtrconfig(1M) mtrconfig - configure or display Madge PCI Token Ring interface parameters.
multi(1M) multi - switch the system to multiuser mode
mvdir(1M) mvdir - move a directory
named(1M) named, named-xfer - internet domain name server (DNS)
nbpd(1M) nbpd - AppleTalk Name Binding Protocol daemon
nbpremove(1M) nbpremove - unregister an entity name
ncheck(1M) ncheck - generate pathnames from i-numbers
NetIfManager(1M) NetIfManager - Network Interface Manager
netprint(1M) netprint - Submit lp print job to remote spooler via a network connection
netsnoop(1M) netsnoop - capture and decode network traffic
network(1M) network - network initialization and shutdown script
newaliases(1M) newaliases - rebuild the data base for the mail aliases file
nfsd(1M) nfsd, biod - NFS daemons
nfsSetup(1M) nfsSetup - Set up Network File System Service
nfsstat(1M) nfsstat - display Network File System statistics
nisSetup(1M) nisSetup - Set up Network Information System
ns-admin(1M) ns-admin - Netscape Servers Administration Server
ns-httpd(1M) ns-httpd - Netscape Communications and Commerce Servers
nsadmin(1M) nsadmin - Name Service Administration Utility
nsd(1M) nsd - UNS name service daemon
nsmount(1M) nsmount - mount name service filesystem
nvram(1M) nvram, sgikopt - get or set non-volatile RAM variables
nwfsdebug(1M) nwfsdebug - enable or disable diagnostic output from the NetWare file system
nwmount(1M) nwmount - create a mount point for accessing NetWare servers
onlinediag(1M) onlinediag - run diagnostic tests on cpus to test floating point units.
pac(1M) pac - BSD printer accounting information
papserver(1M) papserver - spool files from network-connected Macintoshes
passmgmt(1M) passmgmt - password files management
peer_encaps(1M) peer_encaps - Simple Network Management Protocol Agent Encapsulator
peer_snmpd(1M) peer_snmpd - Simple Network Management Protocol daemon
permissions(1M) permissions - Change Permissions - Modify Permissions and Ownership of Files
ping(1M) ping - send ICMP ECHO_REQUEST packets to network hosts
pkgadd(1M) pkgadd - transfer software package to the system
pkgask(1M) pkgask - stores answers to a request script
pkgchk(1M) pkgchk - check accuracy of installation
pkgrm(1M) pkgrm - removes a package from the system
podd(1M) podd - Printer Object Database (POD) server
portmap(1M) portmap - TCP, UDP port to RPC program number mapper
powerdown(1M) powerdown - stop all processes and halt the system
ppagesd(1M) ppagesd - PeoplePages database server
ppd(1M) ppd - Impressario PPD driver for use with PostScript capable printers.
ppp(1M) ppp, if_ppp, ppp_fram - Point-to-Point Protocol
PppManager(1M) PppManager - PPP Manager
pppstat(1M) pppstat - Point-to-Point Protocol (PPP) Status
preset(1M) preset - reset the lp spooling system to a pristine state by deleting printers
printers(1M) printers - graphical printer manager command
PrivilegeManager(1M) PrivilegeManager, privmgr - privilege manager
ProcessManager(1M) ProcessManager - Process Manager
proclaim(1M) proclaim - client for Dynamic Host Configuration Protocol (DHCP)
ProclaimRelayMgr(1M) ProclaimRelayMgr - graphical interface for the proclaim relay-agent
ProclaimServerMgr(1M) ProclaimServerMgr - graphical interface for proclaim server configuration
profiler(1M) profiler: prfld, prfstat, prfdc, prfsnap, prfpr - UNIX system profiler
prom(1M) prom - PROM monitor
prtvtoc(1M) prtvtoc - print disk volume header information
psf(1M) psf - PostScript printer driver.
psif(1M) psif - printer input filter ( lpr(1) only )
psifconfig(1M) psifconfig - show and set packet scheduling interface configuration
psreverse(1M) psreverse - reverse printer output
pwck(1M) pwck - password file checker
pwconv(1M) pwconv - install and update /etc/shadow with information from /etc/passwd
qlist(1M) qlist - display list of print queues on a NetWare server
query(1M) query - query AppleTalk Printer and put response into a file.
quot(1M) quot - summarize filesystem ownership
quotacheck(1M) quotacheck - EFS filesystem quota consistency checker
quotaon(1M) quotaon, quotaoff - turn filesystem quotas on and off
raid(1M) raid - RAID subsystem maintenance utility
rarpd(1M) rarpd - DARPA Reverse Address Resolution Protocol daemon
rc0(1M) rc0 - run commands required to enter single-user mode or halt the system
rc2(1M) rc2 - run commands required for multi-user environment
rdisc(1M) rdisc - Internet router discovery daemon
rdistd(1M) rdistd - remote file distribution server program
reboot(1M) reboot - reboot the system
registrar(1M) registrar - IP address update command for NIS hosts data base
reinstallpr(1M) reinstallpr - reinstall System V network printers
RemovableMediaManager(1M) RemovableMediaManager - removable media manager
removepppin(1M) removepppin - remove a PPP incoming entry.
removepppout(1M) removepppout - remove a PPP outgoing entry.
removeSwap(1M) removeSwap - removes the indicated swap element
renice(1M) renice - alter priority of running processes
repquota(1M) repquota - summarize quotas for a local filesystem
restore(1M) [a_man/cat1] restore, rrestore - incremental filesystem restore
restore(1M) [a_man/cat1/sysadm] restore - restore files from backup
resymlink(1M) resymlink - force a recreation of a symbolic link file
rexd(1M) rexd - RPC-based remote execution server
rexecd(1M) rexecd - remote execution server
rfindd(1M) rfindd - rfind daemon
ripsock(1M) ripsock - drive a PostScript rip via a TCP/IP socket
rlogind(1M) rlogind - remote login server
rmail(1M) rmail - receive mail via UUCP
rmdefpriv(1M) rmdefpriv - remove a default system administration privilege from the system
rmfstabentry(1M) rmfstabentry - remove a filesystem entry from the /etc/fstab file.
rmprinter(1M) rmprinter - remove a printer from the System V spooling system
rmpriv(1M) rmpriv - remove a privilege from the privilege database
rmprivuser(1M) rmprivuser - remove a user's system administration privileged user status
rmt(1M) rmt - remote magtape protocol module
route(1M) route - manually manipulate the routing tables
routed(1M) routed - network RIP and router discovery routing daemon
rpc.passw(1M) rpc.passwd - server for modifying NIS password file
rpcbind(1M) rpcbind - universal addresses to RPC program number mapper
rpcinfo(1M) rpcinfo - report RPC information
rquotad(1M) rquotad - remote quota server
rshd(1M) rshd - remote shell server
rstat(1M) rstat - show resource reservation status
rstatd(1M) rstatd - kernel statistics server
rsvpd(1M) rsvpd - Resource ReSerVations Protocol daemon
rsvpeep(1M) rsvpeep - display multicast RSVP state
rtap(1M) rtap - real-time application program
rtmpd(1M) rtmpd - AppleTalk Routing Table Maintenance daemon
run-proclaim(1M) run-proclaim - proclaim initialization, shutdown, and status script
runacct(1M) runacct - run daily accounting
runcatalog(1M) runcatalog - run a system administration manager
runexec(1M) runexec - run an executable program described in an executable descriptor file
runpanel(1M) runpanel - run a system administration status panel
runpriv(1M) runpriv - run privileged commands
runtask(1M) runtask - run a system administration active guide
rusersd(1M) rusersd - network username server
rwalld(1M) rwalld - network rwall server
rwhod(1M) rwhod - system status server
sabgicons(1M) sabgicons - list serialized dna for removable media and unused disk icons
sac(1M) sac - service access controller
sar(1M) sar: sa1, sa2, sadc - system activity report package
sat_echo(1M) sat_echo - echo standard input into the system audit trail
sat_interpret(1M) sat_interpret - convert audit records from binary to English
sat_reduce(1M) sat_reduce - filter interesting records from the system audit trail
sat_select(1M) sat_select - preselect events for the system audit trail to gather
sat_summarize(1M) sat_summarize - generate statistics on a stream of audit records
satconfig(1M) satconfig - configure the system audit trail to collect particular events
satd(1M) satd - reliably save the system audit trail
satmpd(1M) satmpd - Security Attribute Token Mapping Protocol Daemon
savecore(1M) savecore - save a crash vmcore dump of the operating system
scanners(1M) scanners - scanner installation tool
scsiadminswap(1M) scsiadminswap - perform a live plug or unplug of a scsi device
scsicontrol(1m) scsicontrol - probe and control scsi devices
scsifo(1m) scsifo - Show Failover status and initiate Failover.
scsiha(1m) scsiha - probe and control scsi buses
scsihotswap(1M) scsihotswap - perform hot plug or unplug of scsi device
scsiquiesce(1M) scsiquiesce - stop all SCSI bus activity for a specific amount of time
securesystem(1M) securesystem - improve system security
sendmail(1M) sendmail, mailq - send network mail
SerialDeviceManager(1M) SerialDeviceManager - serial device manager
setdevperms(1M) setdevperms - Update printing device entries in /etc/ioperms
setDiskParts(1M) setDiskParts - sets a disk's partition information
setisdnparm(1M) setisdnparm - configure ISDN and start ISDN deamon.
setlogopt(1M) setlogopt - set system administration logging options
setmnt(1M) setmnt - establish mount table
setNameServers(1M) setNameServers - set nameserver entries in /etc/resolv.conf
setsym(1M) setsym - set up a debug kernel for symbolic debugging
setupMacPrinters(1M) setupMacPrinters - install a Macintosh or PC printer.
share_inst(1M) share_inst, client_inst - diskless software installation tools
sharefinder(1M) sharefinder - locate shared resources on other workstations
sharefs(1M) sharefs - enable a filesystem/directory to be accessible by another host.
sharemgr(1M) sharemgr - shared resource manager
sharePrinters(1M) sharePrinters - share local printers with remote hosts.
shareRemovableMedia(1M) shareRemovableMedia - share a removable media device
showfiles(1M) showfiles - show files belonging to installed products
showmount(1M) showmount - show all remote NFS mounts
showprods(1M) showprods - show products installed on system
shutdown(1M) shutdown - shut down system, change system state
sid(1M) sid - print the current array session handle and/or project ID
single(1M) single - switch the system to single-user mode
slip(1M) slip, if_sl, if_sl.o - Serial Line IP
slist(1M) slist - display list of NetWare servers
smtconfig(1M) smtconfig - configure or display FDDI interface parameters
smtd(1M) smtd - FDDI Station Management protocol daemon
smtmaint(1M) smtmaint - set FDDI line state
smtping(1M) smtping - send FDDI SMT Echo Request frames to FDDI stations
smtring(1M) smtring - examines the state of FDDI ring
sn0log(1M) sn0log - Read Origin and Onyx2 CPU flash PROM log(s)
sn0msc(1M) sn0msc - Perform Origin and Onyx2 system controller operations
snetd(1M) snetd - DLPI network daemon
snmpd(1M) snmpd - Simple Network Management Protocol daemon
spoolserv(1M) spoolserv - a print queue information daemon
spray(1M) spray - spray packets
sprayd(1M) sprayd - spray server
stacker(1M) stacker - robotics control program
startautofs(1M) startautofs - start autofs deamon.
startautomount(1M) startautomount - start automount deamon.
startnfs(1M) startnfs - start nfs deamon.
stat(1M) stat - display stat attributes of named files
statd(1M) statd - network status monitor daemon
stopisdnd(1M) stopisdnd - kill the ISDN deamon.
stopppp(1M) stopppp - Stop a PPP call.
strace(1M) strace - print STREAMS trace messages
strain(1M) strain - extract errors from build log files.
strclean(1M) strclean - STREAMS error logger cleanup program
strerr(1M) strerr - STREAMS error logger daemon
su(1M) su - become superuser or another user
suattr(1M) suattr - Execute shell command with specified capabilities at specified MAC label
sulogin(1M) sulogin - access single-user mode
swap(1M) swap - swap administrative interface
SwapManager(1M) SwapManager - view and manage system swap space
swmgr(1M) swmgr, SoftwareManager - software manager
swpkg(1M) swpkg - SGI product packager
symmon(1M) symmon - kernel symbolic debugger
sync(1M) sync - update the super block
sysctlrd(1M) sysctlrd - communicates with the system controller and LCD front panel on Onyx/Challenge L/XL systems
syserrpanel(1M) syserrpanel - System Alert Settings
syslogd(1M) syslogd - log systems messages
sysmgr(1M) sysmgr - System Manager - Access to Desktop System Administration
sysmon(1M) sysmon - System log file viewer
sysmonpp(1M) sysmonpp - System Monitor Preprocessor
systune(1M) systune - display and set tunable parameters
talkd(1M) talkd - remote user communication server
telnetd(1M) telnetd - internet TELNET protocol server
tftpd(1M) tftpd - internet Trivial File Transfer Protocol server
tic(1M) tic - terminfo compiler
timed(1M) timed - time server daemon
timedc(1M) timedc - timed control program
timeserver(1M) timeserver - time server daemon for Macintoshes running K- Time
timeslave(1M) timeslave - 'slave' local clock to a better one
toggleSystemTunes(1M) toggleSystemTunes - set speaker volume during startup
traceroute(1M) traceroute - print the route packets take to a network host
uadmin(1M) uadmin - administrative control
umountfs(1M) umountfs - unmount a filesystem.
uncompvm(1M) uncompvm - expand a compressed IRIX vmcore dump of the operating system
unconfigks(1M) unconfigks - unconfiguration program for K-Spool
unmonitorRemovableMedia(1M) unmonitorRemovableMedia - disable mediad monitoring of a device
unschedBackup(1M) unschedBackup - unschedule a backup
unsharefs(1M) unsharefs - remove a filesystem from the accessable list.
unsharePrinters(1M) unsharePrinters - stop sharing local printers with remote hosts.
unshareRemovableMedia(1M) unshareRemovableMedia - stop sharing a removable media device
updateclogin(1M) updateclogin - update the graphical login configuration file
updbootparam(1M) updbootparam - NIS bootparams database update program
UserManager(1M) UserManager - User Accounts Manager
uucheck(1M) uucheck - check the uucp directories and permissions file
uucico(1M) uucico - file transport program for the uucp system
uucleanup(1M) uucleanup - uucp spool directory clean-up
uucpd(1M) uucpd - UUCP over TCP/IP daemon
uugetty(1M) uugetty - set terminal type, modes, speed, and line discipline
uusched(1M) uusched, pollhost, uudemon.hour, uudemon.poll - the scheduler for the uucp file transport program
uutry(1M) Uutry - try to contact remote system with debugging on
uuxqt(1M) uuxqt - execute remote command requests
verifyDisk(1M) verifyDisk - verifies disk surface and partitions as an option disk
versions(1M) versions - software versions tool
viewlog(1M) viewlog - view the system administration log
wakeupat(1M) wakeupat - request that system power back on at a future time
wchrtbl(1M) wchrtbl - generate character classification and conversion tables for ASCII and supplementary code sets
whodo(1M) whodo - who is doing what
xactl(1m) xactl - extended accounting control
xbstat(1M) xbstat - monitor Crossbow (Xbow) traffic
xfs_bmap(1M) xfs_bmap - print block mapping for an XFS file
xfs_check(1M) xfs_check - check XFS filesystem consistency
xfs_copy(1M) xfs_copy - copy the contents of an XFS filesystem
xfs_estimate(1M) xfs_estimate - estimate the space that an XFS filesystem will take
xfs_growfs(1M) xfs_growfs - expand an XFS filesystem
xfs_logprint(1M) xfs_logprint - print the log of an XFS filesystem
xfs_ncheck(1M) xfs_ncheck - generate pathnames from i-numbers for XFS
xfs_repair(1M) xfs_repair - repair an XFS filesystem
xfsdump(1M) xfsdump - XFS filesystem incremental dump utility
xfsinvutil(1M) xfsinvutil - xfsdump inventory database checking and pruning utility
xfsrestore(1M) xfsrestore - XFS filesystem incremental restore utility
xlv_admin(1M) xlv_admin - modifies XLV logical volume objects and their disk labels
xlv_assemble(1M) xlv_assemble - initialize logical volume objects from disk labels
xlv_make(1M) xlv_make - create logical volume objects
xlv_mgr(1M) xlv_mgr - administers XLV logical volume objects and their disk labels
xlv_set_primary(1M) xlv_set_primary - set the primary plex of a logical volume
xlv_shutdown(1M) xlv_shutdown - shut down XLV volumes
xlvCreateLV(1M) xlvCreateLV - creates a new xlv logical volume
xlvDelete(1M) xlvDelete - deletes an xlv object
xlvExtend(1M) xlvExtend - extend an xlv volume
xlvShow(1M) xlvShow - shows information about xlv configuration and objects
xnetdd(1M) xnetdd - Xinet's NET Doubler Daemon
yp_bootparam(1M) yp_bootparam - update NIS bootparams database
yp_host(1M) yp_host - update NIS "hosts" database
ypinit(1M) ypinit - build and install NIS database
ypmake(1M) ypmake - rebuild and distribute NIS databases
yppoll(1M) yppoll - show version of NIS map on NIS server
yppush(1M) yppush - force propagation of a changed NIS map
ypserv(1M) ypserv, ypbind - NIS server and binder processes
ypset(1M) ypset - point ypbind at a particular NIS server
ypupdated(1M) ypupdated - server for changing NIS information
ypxfr(1M) ypxfr - transfer an NIS map from some NIS server to here