addpppout(1M)

NAME
     addpppout - add a PPP outgoing entry.

SYNOPSIS
     /usr/sysadm/privbin/addppppout -c connName -t connType -p phoneNum -n
     loginName/sysName [ -w ] [ -a authType ] [ -x maxChannel ] [ -i
     minChannel ] [ -e secWaitQuiet ] [ -l localIPAddr ] [ -r remoteIPAddr ] [
     -h remoteHostName ] [ -y appType ] [ -b baudRate ] [ -fqsu ]

DESCRIPTION
     Addpppout adds a PPP outgoing entry to the system to enable the system to
     call another host using the PPP protocol.  Please refer to PPP(1M) for a
     detailed description of the input parameters.

OPTIONS
     -c connName
               The unique name given to identify this entry.

     -t connType
               The type of equipement at the physical layer. It supports
               "MODEM" and "ISDN" and is case insensitive.

     -p phoneNum
               The phone number to call. One phoneNum option per phone number.

     -n loginName/sysName
               LoginName or sysName is the name given to identify the outgoing
               entry.

     -w        if it is specified, addpppout will request the user to enter a
               password on stdin that will be used to login to the remote
               system.  -a authType It supports "PAP", "CHAP", "NOPAP", and
               "NOCHAP" and they are case insensitive.

     -x maxChannel
               It specifies the maximum number of channels to open during the
               call.

     -i minChannel
               It specifies the minimum number of channels to open at any time
               during the call.

     -e secWaitQuiet
               It specifies the number of seconds to wait before dropping the
               line in quiet mode. This is used when the -q option is used to
               select quiet mode.

     -l localIPAddr
               IP address of the local host in dotted notation.  It is only
               needed if the IP address is different from the IP address of
               the local machine.
     -r remoteIPAddr
               IP address of the remote host in dotted notation. If it is not
               specified, the remote host address is obtained through
               negotiation during handshaking.

     -h remoteHostName
               The name of the remote host.  It is required if the -f flag is
               present.

     -y appType
               The type of applications used after the call is open. When not
               specified or specified as 0, it means simple applications and
               no special parameters are added. When it is equal to 1, it
               means Audio/Video application and special parameters are added
               to customize.

     -b baudRate
               The transmission rate.

     -f        Add the remote host name and IP address into /etc/hosts file.

     -s        Start up this PPP call during system startup.

     -u        Sdd default route for the remote host.

FILES
     /etc/ppp.conf        PPP configuration file
     /etc/uucp/Systems    Phone number entry file
     /etc/hosts           System host name file

SEE ALSO
     PppManager(1M), runpriv(1M), addpppin(1M), execppp(1M), removepppin(1M),
     removepppout(1M), stopppp(1M), ppp(1M).