aview(1)
aview, ArrayView - array status monitor for the X Window System
As shipped in IRIX 6.5.7. Unchanged since IRIX 6.5.
NAME aview, ArrayView - array status monitor for the X Window System SYNOPSIS ArrayView [options...] aview [options...] DESCRIPTION The ArrayView command (also known by its synonym aview) is used to display status information about the various machines in an array. The ArrayView window is made up of two sections. In the top section, a brief summary of the overall system utilization of each machine is displayed. In the bottom section, a separate pane for each machine is used to display more detail about some aspect of the system, such as logged-in users or the most active processes. The relative size of the upper and lower sections can be controlled by dragging the "sash" button on the right hand side of the separator line between them. The type of information displayed in the lower section of the ArrayView window is controlled from the View menu. There are several options: CPU Hogs Displays information about the most active processes on each machine, according to their CPU utilization sampled over a period of several seconds. Processes Displays information about all active processes on each machine. Users Displays a list of all users logged in to each machine. In the CPU Hogs and Processes views, it is possible to select an individual array session by clicking on a process belonging to that array session with the left mouse button. Once an array session has been selected, various actions can be performed on it from the Actions menu. These include: Kill Session Kill the array session by sending a TERM signal to all of the processes in the array session. Suspend Session Temporarily suspend the array session by sending a TSTP signal to all of the processes in the array session. Resume Session Resume a suspended array session by sending a CONT signal to all of the processes in the array session. In addition, a popup menu containing these actions will be displayed when the right mouse button is clicked on a process. The Launch menu can be used to launch programs that use the MPI or PVM message passing libraries. The MPI Job... item will invoke the mpiview program if it has been installed. If the MPIRUN_DIR environment variable was set when ArrayView was invoked, its value will be passed along to mpiview as well (note, however, that no other environment variables are passed along). Similarly, the PVM Job... item will invoke the xpvm program if it has been installed. If the PVM_ROOT environment variable was set when ArrayView was invoked, its value will be passed along to xpvm. If mpiview or xpvm are not installed, selecting the corresponding menu item will cause an error dialog box to be displayed. OPTION SETTINGS The Options menu is used to control some of the details of operating ArrayView. Array Selection The Array... item of the Options menu brings up the Array Selection dialog box, which consists mostly of a list of the arrays known to the currently selected array services daemon. The array currently being displayed will be highlighted. To switch to a different array, simply select it from the list and click OK. Selecting <default> will cause the array services daemon's default array to be chosen. Refresh Settings The Refresh... item of the Options menu brings up the Refresh Settings dialog box. This is used to control how the screen and data are refreshed. When the Auto refresh option is turned on, the screen will be refreshed periodically with the latest available information. The interval (in seconds) between automatic refreshes is controlled by the Screen refresh field of the dialog box. When Auto refresh is off, data can be refreshed manually by selecting the Refresh now item on the View menu. If the Freeze on select option of the Refresh Settings dialog is chosen, then automatic refresh will be suspended temporarily whenever an array session has been selected. Auto-refresh will resume ("thaw") when an action is performed on the array session or when the array session is deselected by clicking on it a second time. If Freeze on select is not chosen, it is possible that a selection may be lost if the screen is refreshed before an action is performed. The Refresh on thaw option causes the screen to be refreshed immediately after resuming auto-refresh. This can be useful if the screen refresh interval is large. The Collection sample length interval is used to specify the length in seconds of the sample interval used by the CPU Hogs view. It has no effect on the other views. The Pause between samples interval controls the length (in seconds) of the pause between the time that one batch of data is received from the array services daemon and the time that the next one is requested. Notice that this is separate from the screen refresh interval, because screen refresh is asynchronous with data collection. If the screen refresh interval is large, it may be useful to increase the pause interval as well to avoid unnecessary overhead. Server Information The Server... item of the Options menu brings up the Server Information dialog box. Ordinarily, it is only necessary to change this information if you wish to use an alternate array services daemon. The Hostname and Port number fields of this dialog box are used to select the location of the array services daemon to be contacted for status information. The Forward requests via local server option is used to route all array services requests via the local array services daemon, even if they are destined for a different machine. It is generally only necessary to do this when array services authentication is being used and you do not wish to manually set the authentication keys. If you wish for array services requests to be sent directly to the target servers even though authentication is in use, it is necessary to specify the local and remote authentication keys in the appropriate fields of the Authentication section of the dialog box. Contact your system administrator for these keys, or see arrayd(1m) and arrayd.conf(4) for more information. COMMAND LINE OPTIONS Valid options include: -array arrayname Specifies the name of the array to be monitored. If not specified, the array services daemon's default destination will be used. -direct Indicates that array services requests destined for remote servers should be sent directly to those servers, rather than being forwarded to them by the local array services daemon. This will fail on systems that use array services authentication unless the -Kl and -Kr options are also specified. -direct is the default behavior under normal circumstances (but see the description of the ARRAYD_FORWARD variable, below). Specifying -direct is equivalent to turning off the Forward requests via local server option in the Server Information dialog. -demo Start ArrayView in "demo mode". This causes the actions in Action menu to be displayed in a dialog box, but not actually performed. If demo mode has been enabled by default (see X Resources, below), then -nodemo will disable it. -forward (or -F) Indicates that array services requests destined for remote servers should be forwarded to those servers via the local array services daemon, rather than being sent directly to them. This is useful when array services authentication is in use. -forward is the default behavior if the value of the ARRAYD_FORWARD environment variable begins with the letter "Y" (as in "yes"; it may be in either upper or lower case). -Kl key Use key for the local authentication key when communicating directly with a remote array services daemon. key is an unsigned 64-bit value. The default local key is obtained from the environment variable ARRAYD_LOCALKEY; if that does not exist, no key is used. The actual role played by key depends on the authentication method used by array services in a particular configuration. In general, it is not used when communicating with an array services daemon on the local machine. -Kr key Use key for the remote authentication key when communicating directly with a remote array services daemon. key is an unsigned 64-bit value. The default remote key is obtained from the environment variable ARRAYD_REMOTEKEY; if that does not exist, no key is used. The actual role played by key depends on the authentication method used by array services in a particular configuration. In general, it is not used when communicating with an array services daemon on the local machine. -mode view Starts ArrayView in view view, which may be "cpuhogs", "processes" or "users" (case is not significant). -pause #secs Specifies the Pause between samples interval (see "Refresh Settings"). -port port (or -p port) Specifies the port address of the array services daemon. Defaults to the value of the "ARRAYD_PORT" environment variable if present, or the standard port number of the "sgi-arrayd" service otherwise. -refresh #secs Specifies the Screen refresh interval (see "Refresh Settings"). -sample #secs Specifies the Collection sample length interval (see "Refresh Settings"). -server server Specifies the hostname or IP address of the array services daemon. Defaults to the value of the "ARRAYD" environment variable if present, or "localhost" otherwise. -skip0 Indicates that any process belong to array session 0 (typically system processes) should be omitted from the display. If this option has been enabled by default (see "X Resources"), it can be disabled with -noskip0. X RESOURCES Many of the options that can be set in dialog boxes or from the command line can also be set with X resources. The class name for ArrayView is Aview. Valid resources include: autoRefresh (boolean, default TRUE) Specifies the initial setting of the Auto refresh option. demoMode (boolean, default FALSE) Specifies the default setting of demo mode. forwardRequests (boolean) Specifies a default setting for the Forward requests via local server option. If this resource is not specified, a default setting is obtained from the environment variable ARRAYD_FORWARD. freezeOnSelect (boolean, default TRUE) Specifies the default setting of the Freeze on select option. localKey (string) Specifies a default local authentication key. If this resource is not specified, a default key is obtained from the environment variable ARRAYD_LOCALKEY. pauseInterval (integer) Specifies the default Pause between samples interval. port (integer) Specifies the default IP port number for the array services daemon. If this resource is not specified, a default port number is obtained from the environment variable ARRAYD_PORT, or the "sgi-arrayd" service. refreshInterval (integer) Specifies the default Screen refresh interval. refreshOnThaw (boolean, default TRUE) Specifies the default setting of the Refresh on thaw option. remoteKey (string) Specifies a default remote authentication key. If this resource is not specified, a default key is obtained from the environment variable ARRAYD_REMOTEKEY. sampleInterval (integer) Specifies the default Collection sample length interval. server (string) Specifies the default hostname for the array services daemon to be used for most array services requests. If this resource is not specified, a default hostname is obtained from the environment variable ARRAYD. skipASHZero (boolean, default TRUE) If true, indicates that any process belong to array session 0 (typically system processes) should be omitted from the display. viewMode (string) Specifies the default view mode. See the -mode command line option for valid values. NOTES The array services daemon (arrayd(1M)) should be running on all machines that are to be monitored. It does not necessarily have to be running on the machine that executes ArrayView if an alternate server was specified in some way. SEE ALSO arrayd(1M), mpiview(1), arrayd.conf(4).