sgegs(3S)
SGEGS - routine is deprecated and has been replaced by routine SGGES
As shipped in IRIX 6.5.30. Added in IRIX 6.5.15.
NAME SGEGS - routine is deprecated and has been replaced by routine SGGES SYNOPSIS SUBROUTINE SGEGS( JOBVSL, JOBVSR, N, A, LDA, B, LDB, ALPHAR, ALPHAI, BETA, VSL, LDVSL, VSR, LDVSR, WORK, LWORK, INFO ) CHARACTER JOBVSL, JOBVSR INTEGER INFO, LDA, LDB, LDVSL, LDVSR, LWORK, N REAL A( LDA, * ), ALPHAI( * ), ALPHAR( * ), B( LDB, * ), BETA( * ), VSL( LDVSL, * ), VSR( LDVSR, * ), WORK( * ) IMPLEMENTATION These routines are part of the SCSL Scientific Library and can be loaded using either the -lscs or the -lscs_mp option. The -lscs_mp option directs the linker to use the multi-processor version of the library. When linking to SCSL with -lscs or -lscs_mp, the default integer size is 4 bytes (32 bits). Another version of SCSL is available in which integers are 8 bytes (64 bits). This version allows the user access to larger memory sizes and helps when porting legacy Cray codes. It can be loaded by using the -lscs_i8 option or the -lscs_i8_mp option. A program may use only one of the two versions; 4-byte integer and 8-byte integer library calls cannot be mixed. PURPOSE This routine is deprecated and has been replaced by routine SGGES. SGEGS computes for a pair of N-by-N real nonsymmetric matrices A, B: the generalized eigenvalues (alphar +/- alphai*i, beta), the real Schur form (A, B), and optionally left and/or right Schur vectors (VSL and VSR). (If only the generalized eigenvalues are needed, use the driver SGEGV instead.) A generalized eigenvalue for a pair of matrices (A,B) is, roughly speaking, a scalar w or a ratio alpha/beta = w, such that A - w*B is singular. It is usually represented as the pair (alpha,beta), as there is a reasonable interpretation for beta=0, and even for both being zero. A good beginning reference is the book, "Matrix Computations", by G. Golub & C. van Loan (Johns Hopkins U. Press) The (generalized) Schur form of a pair of matrices is the result of multiplying both matrices on the left by one orthogonal matrix and both on the right by another orthogonal matrix, these two orthogonal matrices being chosen so as to bring the pair of matrices into (real) Schur form. A pair of matrices A, B is in generalized real Schur form if B is upper triangular with non-negative diagonal and A is block upper triangular with 1-by-1 and 2-by-2 blocks. 1-by-1 blocks correspond to real generalized eigenvalues, while 2-by-2 blocks of A will be "standardized" by making the corresponding elements of B have the form: [ a 0 ] [ 0 b ] and the pair of corresponding 2-by-2 blocks in A and B will have a complex conjugate pair of generalized eigenvalues. The left and right Schur vectors are the columns of VSL and VSR, respectively, where VSL and VSR are the orthogonal matrices which reduce A and B to Schur form: Schur form of (A,B) = ( (VSL)**T A (VSR), (VSL)**T B (VSR) ) ARGUMENTS JOBVSL (input) CHARACTER*1 = 'N': do not compute the left Schur vectors; = 'V': compute the left Schur vectors. JOBVSR (input) CHARACTER*1 = 'N': do not compute the right Schur vectors; = 'V': compute the right Schur vectors. N (input) INTEGER The order of the matrices A, B, VSL, and VSR. N >= 0. A (input/output) REAL array, dimension (LDA, N) On entry, the first of the pair of matrices whose generalized eigenvalues and (optionally) Schur vectors are to be computed. On exit, the generalized Schur form of A. Note: to avoid overflow, the Frobenius norm of the matrix A should be less than the overflow threshold. LDA (input) INTEGER The leading dimension of A. LDA >= max(1,N). B (input/output) REAL array, dimension (LDB, N) On entry, the second of the pair of matrices whose generalized eigenvalues and (optionally) Schur vectors are to be computed. On exit, the generalized Schur form of B. Note: to avoid overflow, the Frobenius norm of the matrix B should be less than the overflow threshold. LDB (input) INTEGER The leading dimension of B. LDB >= max(1,N). ALPHAR (output) REAL array, dimension (N) ALPHAI (output) REAL array, dimension (N) BETA (output) REAL array, dimension (N) On exit, (ALPHAR(j) + ALPHAI(j)*i)/BETA(j), j=1,...,N, will be the generalized eigenvalues. ALPHAR(j) + ALPHAI(j)*i, j=1,...,N and BETA(j),j=1,...,N are the diagonals of the complex Schur form (A,B) that would result if the 2-by-2 diagonal blocks of the real Schur form of (A,B) were further reduced to triangular form using 2-by-2 complex unitary transformations. If ALPHAI(j) is zero, then the j-th eigenvalue is real; if positive, then the j-th and (j+1)-st eigenvalues are a complex conjugate pair, with ALPHAI(j+1) negative. Note: the quotients ALPHAR(j)/BETA(j) and ALPHAI(j)/BETA(j) may easily over- or underflow, and BETA(j) may even be zero. Thus, the user should avoid naively computing the ratio alpha/beta. However, ALPHAR and ALPHAI will be always less than and usually comparable with norm(A) in magnitude, and BETA always less than and usually comparable with norm(B). VSL (output) REAL array, dimension (LDVSL,N) If JOBVSL = 'V', VSL will contain the left Schur vectors. (See "Purpose", above.) Not referenced if JOBVSL = 'N'. LDVSL (input) INTEGER The leading dimension of the matrix VSL. LDVSL >=1, and if JOBVSL = 'V', LDVSL >= N. VSR (output) REAL array, dimension (LDVSR,N) If JOBVSR = 'V', VSR will contain the right Schur vectors. (See "Purpose", above.) Not referenced if JOBVSR = 'N'. LDVSR (input) INTEGER The leading dimension of the matrix VSR. LDVSR >= 1, and if JOBVSR = 'V', LDVSR >= N. WORK (workspace/output) REAL array, dimension (LWORK) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. LWORK (input) INTEGER The dimension of the array WORK. LWORK >= max(1,4*N). For good performance, LWORK must generally be larger. To compute the optimal value of LWORK, call ILAENV to get blocksizes (for SGEQRF, SORMQR, and SORGQR.) Then compute: NB -- MAX of the blocksizes for SGEQRF, SORMQR, and SORGQR The optimal LWORK is 2*N + N*(NB+1). If LWORK = -1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. INFO (output) INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value. = 1,...,N: The QZ iteration failed. (A,B) are not in Schur form, but ALPHAR(j), ALPHAI(j), and BETA(j) should be correct for j=INFO+1,...,N. > N: errors that usually indicate LAPACK problems: =N+1: error return from SGGBAL =N+2: error return from SGEQRF =N+3: error return from SORMQR =N+4: error return from SORGQR =N+5: error return from SGGHRD =N+6: error return from SHGEQZ (other than failed iteration) =N+7: error return from SGGBAK (computing VSL) =N+8: error return from SGGBAK (computing VSR) =N+9: error return from SLASCL (various places) SEE ALSO INTRO_LAPACK(3S), INTRO_SCSL(3S) This man page is available only online.