t_accept(3N)
t_accept - accept a connect request
As shipped in IRIX 6.5.30. Unchanged since IRIX 6.5.
NAME t_accept - accept a connect request SYNOPSIS #ifdef _XOPEN_SOURCE #include <xti.h> #else #include <tiuser.h> #endif int t_accept( int fd, int resfd, struct t_call *call); DESCRIPTION This function is issued by a transport user to accept a connect request. fd identifies the local transport endpoint where the connect indication arrived, resfd specifies the local transport endpoint where the connection is to be established, and call contains information required by the transport provider to complete the connection. call points to a t_call structure that contains the following members: struct netbuf addr; struct netbuf opt; struct netbuf udata; int sequence; netbuf is described in intro(3N). In call, addr is the address of the caller, opt indicates any protocol-specific parameters associated with the connection, udata points to any user data to be returned to the caller, and sequence is the value returned by t_listen that uniquely associates the response with a previously received connect indication. A transport user may accept a connection on either the same, or on a different, local transport endpoint from the one on which the connect indication arrived. If the same endpoint is specified (that is, resfd=fd), the connection can be accepted unless the following condition is true: The user has received other indications on that endpoint but has not responded to them (with t_accept or t_snddis). For this condition: #ifdef _XOPEN_SOURCE t_accept will fail and set t_errno to TINDOUT. #else t_accept will fail and set t_errno to TBADF. #endif If a different transport endpoint is specified (resfd!=fd), the endpoint must be bound to a protocol address and must be in the T_IDLE state [see t_getstate(3N)] before the t_accept is issued. For both types of endpoints, t_accept will fail and set t_errno to TLOOK if there are indications (for example, a connect or disconnect) waiting to be received on that endpoint. The values of parameters specified by opt and the syntax of those values are protocol specific. The udata argument enables the called transport user to send user data to the caller and the amount of user data must not exceed the limits supported by the transport provider as returned in the connect field of the info argument of t_open or t_getinfo. If the len [see netbuf in intro(3N)] field of udata is zero, no data will be sent to the caller. This function resides within both the X/Open compliant libxnet and the SVR4 compliant libnsl Network Services libraries. Network Services applications which require X/Open compliance must link-load with -lxnet. Network Services applications which require SVR4 compliance must link- load with -lnsl. On failure, t_errno may be set to one of the following: TBADF The specified file descriptor does not refer to a transport endpoint, or the user is invalidly accepting a connection on the same transport endpoint on which the connect indication arrived. TOUTSTATE The function was issued in the wrong sequence on the transport endpoint referenced by fd, or the transport endpoint referred to by resfd is not in the T_IDLE state. TACCES The user does not have permission to accept a connection on the responding transport endpoint or use the specified options. TBADOPT The specified options were in an incorrect format or contained invalid information. TBADDATA The amount of user data specified was not within the bounds supported by the transport provider as returned in the connect field of the info argument of t_open or t_getinfo. TBADADDR If _XOPEN_SOURCE is defined, TBADADDR will be returned because the specified protocol address was in an incorrect format or contained illegal information. TBADSEQ An invalid sequence number was specified. TFLOW An errno of EAGAIN was returned from the ioctl() call when trying to send the connection response packet. When this happens, t_errno is set to TFLOW. TLOOK An asynchronous event has occurred on the transport endpoint referenced by fd and requires immediate attention. TNOTSUPPORT This function is not supported by the underlying transport provider. TSYSERR A system error has occurred during execution of this function. TINDOUT If _XOPEN_SOURCE is defined, TINDOUT will be returned because the function was called with fd=resfd but there are outstanding connection indications on the endpoint. Those other connection indications must be handled either by rejecting them via t_snddis(3N) or accepting them on a different endpoint via t_accept(3N). TPRIVMISMATCH If _XOPEN_SOURCE is defined, TPRIVMISMATCH will be returned because the file descriptors fd and resfd do not refer to the same transport provider. TRESQLEN If _XOPEN_SOURCE is defined, TRESQLEN will be returned because the endpoint referenced by resfd (where resfd != fd) was bound to a protocol address with a qlen that is greater than zero. TPROTO If _XOPEN_SOURCE is defined, TPROTO will be returned because a communication problem has been detected between XTI and the transport provider for whicjh there is no other suitable XTI (t_errno). TRESADDR If _XOPEN_SOURCE is defined, TRESADDR will be returned because this transport provider requires both fd and resfd to be bound to the same address. This error results if they are not. SEE ALSO intro(3N), t_connect(3N), t_getstate(3N), t_listen(3N), t_open(3N), t_optmgmt(3N) t_rcvconnect(3N) DIAGNOSTICS Upon successful completion, a value of 0 is returned. Otherwise, a value of -1 is returned and t_errno is set to indicate the error.