tsset(1M)

NAME
     tsset - sets option values in personality daemon

SYNOPSIS
     /usr/etc/ts/tsset -d pathname -t trace
     /usr/etc/ts/tsset -T level
     /usr/etc/ts/tsset -d pathname -t trace -T level

DESCRIPTION
     The tsset command sets option values in a personality daemon.  These
     option settings override those set in the personality-daemon
     configuration file, /etc/config/tspd.config.  The options set by tsset
     remain in effect until they are reset by another tsset command.

     The command currently supports one option, the tracing enabled setting.
     For more information on the personality-daemon configuration file, see
     the ts(7) man page.

     Each personality daemon saves the options set by tsset and uses these
     options if the daemon is stopped and then restarted.

     The tsset command accepts the following options:

     -d pathname        Specifies the name of the device file.  That is, any
                        legal device name:
                        /dev/mt/tps*
                        /dev/rmt/tps*
                        /hw/tape/tps*
                        /dev/mt/*/lun*/c*p*
                        /dev/rmt/*/lun*/c*p*
                        /hw/tape/*/lun*/c*p*

                        Note: The tsset command uses the stat device
                        identified by pathname to communicate with the
                        personality daemon.

     -t trace           Specifies whether tracing is enabled.  Trace entries
                        are entered in the /usr/adm/SYSLOG file.  trace is one
                        of the following:

                        on   Turns tracing on.

                        off  Turns tracing off.

     -T level           Specifies the tape support (TS) driver tracing level.
                        Trace entries are entered in the /usr/adm/SYSLOG file.
                        level is one of the following:

                        0    Debug tracing is not enabled.
                        1    Only records panics in the log file.

                        2    Records alerts and panics in the log file.

                        3    Records warnings as well as alerts and panics in
                             the log file.

                        4    Records other information as well as warnings,
                             alerts, and panics in the log file.

EXAMPLES
     The following tsset command turns tracing on:

          tsset -d /dev/rmt/tps2d5 -t on

     The following tsset command turns tracing off for the same device used in
     the first example.

          tsset -t off -d /hw/tape/tps2d5nrv


FILES
     /dev/mt/lun*stat                   device file

     /dev/mt/*/lun*stat/c*p*            device file

     /dev/rmt/lun*stat                  device file

     /dev/rmt/*/lun*stat/c*p*           device file

     /etc/config/tspd.config            tape support configuration file

     /hw/tape/lun*stat                  device file

     /hw/tape/*/lun*stat/c*p*           device file

     /usr/adm/SYSLOG                    system log file

SEE ALSO
     tsarchive(1M), tsdaemon(1M), tserrpt(1M), tsstop(1M), ts.config(4),
     ts(7).