rpc(3R)
rpc - Remote Procedure Call (RPC) library routines
As shipped in IRIX 6.5.22. Last changed in IRIX 6.5.22.
NAME rpc - Remote Procedure Call (RPC) library routines SYNOPSIS AND DESCRIPTION These routines allow C programs to make procedure calls on other machines across the network. First, the client calls a procedure to send a data packet to the server. Upon receipt of the packet, the server calls a dispatch routine to perform the requested service, and then sends back a reply. Finally, the procedure call returns to the client. #include <rpc/rpc.h> void auth_destroy(AUTH *auth) A macro that destroys the authentication information associated with auth. Destruction usually involves deallocation of private data structures. The use of auth is undefined after calling auth_destroy(). AUTH * authnone_create(void) Create and returns an RPC authentication handle that passes nonusable authentication information with each remote procedure call. This is the default authentication used by RPC. AUTH * authunix_create(const char *host, int uid, int gid, int len, int *aup_gids) Create and return an RPC authentication handle that contains UNIX authentication information. The parameter host is the name of the machine on which the information was created; uid is the user's user ID; gid is the user's current group ID; len and aup_gids refer to a counted array of groups to which the user belongs. It is easy to impersonate a user. AUTH * authunix_create_default(void) Call authunix_create() with the appropriate parameters. enum clnt_stat callrpc(const char *host, u_long prognum, u_long versnum, u_long procnum, xdrproc_t inproc, void *in, xdrproc_t outproc, void *out) Call the remote procedure associated with prognum, versnum, and procnum on the machine, host. The parameter in is the address of the procedure's argument(s), and out is the address of where to place the result(s); inproc is used to encode the procedure's parameters, and outproc is used to decode the procedure's results. This routine returns 0 if it succeeds, or the value of enum clnt_stat cast to an integer if it fails. The routine clnt_perrno() is handy for translating failure statuses into messages. Warning: calling remote procedures with this routine uses UDP/IP as a transport; see clntudp_create() for restrictions. You do not have control of timeouts or authentication using this routine. enum clnt_stat clnt_broadcast(u_long prognum, u_long versnum, u_long procnum, xdrproc_t inproc, void *in, xdrproc_t outproc, void *out, bool_t (*eachresult)(void *, struct sockaddr_in *)) Like callrpc(), except the call message is broadcast to all locally connected broadcast nets. Each time it receives a response, this routine calls eachresult(), whose form is: bool_t eachresult(void *out, struct sockaddr_in *addr) where out is the same as out passed to clnt_broadcast(), except that the remote procedure's output is decoded there; addr points to the address of the machine that sent the results. If eachresult() returns 0, clnt_broadcast() waits for more replies; otherwise it returns with appropriate status. Initially, it waits 4 seconds for a response before retrying. The next wait interval is doubled until it reaches a total wait time of 45 seconds. See also clnt_setbroadcastbackoff(). Warning: broadcast sockets are limited in size to the maximum transfer unit of the data link. For ethernet, this value is 1500 bytes. For FDDI, this value is 4532 bytes. enum clnt_stat clnt_broadcast_exp(u_long prognum, u_long versnum, u_long procnum, xdrproc_t inproc, void *in, xdrproc_t outproc, void *out, bool_t (*eachresult)(void *, struct sockaddr_in *), int inittime, waittime) Like clnt_broadcast(), except you can specify the initial and total wait time. See also clnt_setbroadcastbackoff(). enum clnt_stat clnt_call(CLIENT *clnt, u_long procnum, xdrproc_t inproc, void *in, xdrproc_t outproc, void *out, struct timeval tout) A macro that calls the remote procedure procnum associated with the client handle, clnt, which is obtained with an RPC client creation routine such as clntudp_create(). The parameter in is the address of the procedure's argument(s), and out is the address of where to place the result(s); inproc is used to encode the procedure's parameters, and outproc is used to decode the procedure's results; tout is the time allowed for results to come back. bool_t clnt_freeres(CLIENT *clnt, xdrproc_t outproc, void *out) A macro that frees any data allocated by the RPC/XDR system when it decoded the results of an RPC call. The parameter out is the address of the results, and outproc is the XDR routine describing the results. This routine returns 1 if the results were successfully freed, and 0 otherwise. void clnt_geterr(CLIENT *clnt, struct rpc_err *errp) A macro that copies the error structure out of the client handle to the structure at address errp. void clnt_perrno(enum clnt_stat stat) Print a message to standard error corresponding to the condition indicated by stat. Used after callrpc(). void clnt_perror(CLIENT *clnt, const char *s) Print a message to standard error indicating why an RPC call failed; clnt is the handle used to do the call. The message is prepended with string s and a colon. Used after clnt_call(). void clnt_setbroadcastbackoff(void (*first)(struct timeval *tv), int (*next)(struct timeval *tv)) Set the timeout backoff iterator for clnt_broadcast(). The initial timeout is stored in *tv by first(). Subsequent timeouts are computed in *tv by next() , which returns 1 until a backoff limit is reached, and thereafter returns 0. char * clnt_sperrno(enum clnt_stat stat) Take the same arguments as clnt_perrno(), but instead of sending a message to the standard error indicating why an RPC call failed, return a pointer to a string which contains the message. The string ends with a NEWLINE. clnt_sperrno() is used instead of clnt_perrno() if the program does not have a standard error (a server program quite likely does not), or if the programmer does not want the message to be output with printf, or if a message format different than that supported by clnt_perrno() is to be used. Note: unlike clnt_sperror() and clnt_spcreaterror(), clnt_sperrno() returns a pointer to static data, but the result will not get overwritten on each call. char * clnt_sperror(CLIENT *clnt, const char *s) Like clnt_perror(), except that (like clnt_sperrno()) it returns a string instead of printing to standard error. Bugs: returns a pointer to static data that is overwritten on each call. void clnt_syslog(CLIENT *clnt, const char *s) Logs a LOG_ERR error to syslog(3) indicating why an RPC call failed; clnt is the handle used to do the call. The message is prepended with string s and a colon. void get_myaddress(struct sockaddr_in *addr) Stuff the machine's IP address into *addr, without consulting the library routines that deal with /etc/hosts. The port number is always set to htons(PMAPPORT). struct pmaplist * pmap_getmaps(addr) struct sockaddr_in *addr; A user interface to the portmap service, which returns a list of the current RPC program-to-port mappings on the host located at IP address *addr. This routine can return NULL. The command `rpcinfo -p' uses this routine. u_short pmap_getport(struct sockaddr_in *addr, u_long prognum, u_long versnum, u_int protocol) A user interface to the portmap service, which returns the port number on which waits a service that supports program number prognum, version versnum, and speaks the transport protocol associated with protocol. The value of protocol is most likely IPPROTO_UDP or IPPROTO_TCP. A return value of 0 means that the mapping does not exist or that the RPC system failured to contact the remote portmap service. In the latter case, the global variable rpc_createerr() contains the RPC status. enum clnt_stat pmap_rmtcall(struct sockaddr_in *addr, u_long prognum, u_long versnum, u_long procnum, xdrproc_t inproc, void *in, xdrproc_t outproc, void *out, struct timeval tout, u_long *portp) A user interface to the portmap service, which instructs portmap on the host at IP address *addr to make an RPC call on your behalf to a procedure on that host. The parameter *portp will be modified to the program's port number if the procedure succeeds. The definitions of other parameters are discussed in callrpc() and clnt_call(). This procedure should be used for a ping and nothing else. See also clnt_broadcast(). pmap_settimeouts(), and pmap_setrmtcalltimeout(). bool_t pmap_set(u_long prognum, u_long versnum, u_long protocol, u_short port) A user interface to the portmap service, which establishes a mapping between the triple [prognum, versnum, protocol] and port on the machine's portmap service. The value of protocol is most likely IPPROTO_UDP or IPPROTO_TCP. This routine returns 1 if it succeeds, 0 otherwise. Automatically done by svc_register(). void pmap_setrmtcalltimeout(struct timeval intertry) Set the retry timeout for pmap_rmtcall(). Note that the total timeout per call is an argument to pmap_rmtcall(). void pmap_settimeouts(struct timeval intertry, struct timeval percall) Set the retry and total timeouts for RPCs to the portmapper. These timeouts are used explicitly by pmap_set() and pmap_getport(), and implicitly by clnt*_create(). bool_t pmap_unset(u_long prognum, u_long versnum) A user interface to the portmap service, which destroys all mapping between the triple [prognum, versnum, *] and ports on the machine's portmap service. This routine returns 1 if it succeeds, 0 otherwise. int registerrpc(u_long prognum, u_long versnum, u_long procnum, void *(*procname)(void *), xdrproc_t inproc, xdrproc_t outproc) Register procedure procname with the RPC service package. If a request arrives for program prognum, version versnum, and procedure procnum, procname is called with a pointer to its parameter(s); progname should return a pointer to its static result(s); inproc is used to decode the parameters while outproc is used to encode the results. This routine returns 0 if the registration succeeded, -1 otherwise. Warning: remote procedures registered in this form are accessed using the UDP/IP transport; see svcudp_create() for restrictions. struct rpc_createerr rpc_createerr A global variable whose value is set by any RPC client creation routine that does not succeed. Use the routine clnt_pcreateerror() to print the reason why. void _rpc_errorhandler(int priority, const char *format, ...) Called by the RPC library routines to print an error message to stderr or to syslog(3), if openlog(3) was called. priority values are defined in <syslog.h>. format is printf-like format string. See comments in <rpc/errorhandler.h> for details on defining your own version for more sophisticated error handling. bool_t rpc_control(int op, void info) This RPC library routine exists in IRIX libc but is not yet fully implemented. It may be fully implemented in a future version of IRIX. Until then, use of this routine by applications is unsupported. If a third-party library uses this function to enable multi-threaded RPC, you should use the following code to disable the feature. This code should run after the third-party library's call and before any calls to svc_run, svc_getreq or svc_getreqset. int mt_mode = RPC_SVC_MT_NONE; rpc_control(RPC_SVC_MTMODE_SET, &mt_mode); void svc_destroy(SVCXPRT *xprt) A macro that destroys the RPC service transport handle, xprt. Destruction usually involves deallocation of private data structures, including xprt itself. Use of xprt is undefined after calling this routine. fd_set svc_fdset; A global variable reflecting the RPC service side's read file descriptor bit mask; it is suitable as a parameter to the select(2) system call. This is only of interest if a service implementor does not call svc_run(), in order to do asynchronous event processing, for example. This variable is read-only (do not pass its address to select!), yet it may change after calls to svc_getreqset() or any creation routines. int svc_fds Similar to svc_fdset, but limited to 32 descriptors. This interface is obsoleted by svc_fdset. bool_t svc_freeargs(SVCXPRT *xprt, xdrproc_t inproc, void *in) A macro that frees any data allocated by the RPC/XDR system when it decoded the arguments to a service procedure using svc_getargs(). This routine returns 1 if the results were successfully freed, and 0 otherwise. bool_t svc_getargs(SVCXPRT *xprt, xdrproc_t inproc, void *in) A macro that decodes the arguments of an RPC request associated with the RPC service transport handle, xprt. The parameter in is the address where the arguments will be placed; inproc is the XDR routine used to decode the arguments. This routine returns 1 if decoding succeeds, and 0 otherwise. Only after this routine is called can the server call fork(2) to create a child process to handle the request. struct sockaddr_in * svc_getcaller(SVCXPRT *xprt) The approved way of getting the network address of the caller of a procedure associated with the RPC service transport handle, xprt. void svc_getreq(int rdfds) This routine is provided for compatibility with old code. Use svc_getreqset () when developing new code. void svc_getreqset(fd_set *rdfds) This routine is only of interest if a service implementor does not call svc_run(), but instead implements custom asynchronous event processing. It is called when the select(2) system call has determined that an RPC request has arrived on some RPC socket(s); rdfds is the resultant read file descriptor bit mask. The routine returns when all sockets associated with the value of rdfds have been serviced. bool_t svc_register(SVCXPRT *xprt, u_long prognum, u_long versnum, void (*dispatch)(struct svc_req *,SVCXPRT *), int protocol) Associates prognum and versnum with the service dispatch procedure, dispatch. If protocol is 0, the service is not registered with the portmap service. If protocol is non-zero, then a mapping of the triple [prognum, versnum, protocol] to xprt->xp_port is established with the local portmap service (generally protocol is 0, IPPROTO_UDP or IPPROTO_TCP ). The procedure dispatch has the following form: void dispatch(struct svc_req *request, SVCXPRT *xprt) The svc_register() routine returns 1 if it succeeds, and 0 otherwise. void svc_run(void) This routine never returns. It waits for RPC requests to arrive, and calls the appropriate service procedure using svc_getreq() when one arrives. This procedure is usually waiting for a select() system call to return. bool_t svc_sendreply(SVCXPRT *xprt, xdrproc_t outproc, void *out) Called by an RPC service's dispatch routine to send the results of a remote procedure call. The parameter xprt is the request's associated transport handle; outproc is the XDR routine which is used to encode the results; and out is the address of the results. This routine returns 1 if it succeeds, 0 otherwise. void svc_unregister(u_long prognum, u_long versnum) Remove all mapping of the double [prognum, versnum] to dispatch routines, and of the triple [prognum, versnum, *] to port number. void svc_versquiet(SVCXPRT *xprt) Tell the RPC library to not complain (send no reply message at all) about version errors to the client. This is useful when revving broadcast protocols that sit on a fixed address. TCP services ignore this flag. void svcerr_auth(SVCXPRT *xprt, enum auth_stat why) Called by a service dispatch routine that refuses to perform a remote procedure call due to an authentication error. void svcerr_decode(SVCXPRT *xprt) Called by a service dispatch routine that cannot successfully decode its parameters. See also svc_getargs(). void svcerr_noproc(SVCXPRT *xprt) Called by a service dispatch routine that does not implement the procedure number that the caller requests. void svcerr_noprog(SVCXPRT *xprt) Called when the desired program is not registered with the RPC package. Service implementors usually do not need this routine. void svcerr_progvers(SVCXPRT *xprt, u_long low_vers, u_long high_vers) Called when the desired version of a program is not registered with the RPC package. Service implementors usually do not need this routine. void svcerr_systemerr(SVCXPRT *xprt) Called by a service dispatch routine when it detects a system error not covered by any particular protocol. For example, if a service can no longer allocate storage, it may call this routine. void svcerr_weakauth(SVCXPRT *xprt) Called by a service dispatch routine that refuses to perform a remote procedure call due to insufficient authentication parameters. The routine calls svcerr_auth(xprt, AUTH_TOOWEAK). SVCXPRT * svcraw_create(void) This routine creates a toy RPC service transport, to which it returns a pointer. The transport is really a buffer within the process's address space, so the corresponding RPC client should live in the same address space; see clntraw_create(). This routine allows simulation of RPC and acquisition of RPC overheads (such as round trip times), without any kernel interference. This routine returns NULL if it fails. SVCXPRT * svctcp_create(int sock, u_int sendsize, u_int recvsize) This routine creates a TCP/IP-based RPC service transport, to which it returns a pointer. The transport is associated with the socket sock, which may be RPC_ANYSOCK, in which case a new socket is created. If the socket is not bound to a local TCP port, then this routine binds it to an arbitrary port. Upon completion, - xprt->xp_sock is the transport's socket descriptor, and - xprt->xp_port is the transport's port number. This routine returns NULL if it fails. Since TCP-based RPC uses buffered I/O, users may specify the size of the send and receive buffers; values of 0 choose suitable defaults. SVCXPRT * svcfd_create(int fd, u_int sendsize, u_int recvsize) Create a service on top of any open descriptor. Typically, this descriptor is a connected socket for a stream protocol such as TCP. sendsize and recvsize indicate sizes for the send and receive buffers. If they are zero, a reasonable default is chosen. SVCXPRT * svcudp_bufcreate(int sock, u_int sendsize, u_int recvsize) This routine creates a UDP/IP-based RPC service transport, to which it returns a pointer. The transport is associated with the socket sock, which may be RPC_ANYSOCK, in which case a new socket is created. If the socket is not bound to a local UDP port, then this routine binds it to an arbitrary port. Upon completion, - xprt->xp_sock is the transport's socket descriptor, and - xprt->xp_port is the transport's port number. This routine returns NULL if it fails. This allows the user to specify the maximun packet size for sending and receiving UDP-based RPC messages. SVCXPRT * svcudp_create(int sock) This routine creates a UDP/IP-based RPC service transport, to which it returns a pointer. The transport is associated with the socket sock, which may be RPC_ANYSOCK, in which case a new socket is created. If the socket is not bound to a local UDP port, then this routine binds it to an arbitrary port. Upon completion, xprt->xp_sock is the transport's socket number, and xprt->xp_port is the transport's port number. This routine returns NULL if it fails. Warning: since UDP-based RPC messages can only hold up to 8 kilobytes of encoded data, this transport cannot be used for procedures that take large arguments or return huge results. bool_t xdr_accepted_reply(XDR *xdrs, struct accepted_reply *ar) Used for encoding RPC reply messages. This routine is useful for users who wish to generate RPC-style messages without using the RPC package. bool_t xdr_authunix_parms(XDR *xdrs, struct authunix_parms *aupp) Used for describing UNIX credentials. This routine is useful for users who wish to generate these credentials without using the RPC authentication package. bool_t xdr_callhdr(XDR *xdrs, struct rpc_msg *chdr) Used for describing RPC call header messages. This routine is useful for users who wish to generate RPC-style messages without using the RPC package. bool_t xdr_callmsg(XDR *xdrs, struct rpc_msg *cmsg) Used for describing RPC call messages. This routine is useful for users who wish to generate RPC-style messages without using the RPC package. bool_t xdr_opaque_auth(XDR *xdrs, struct opaque_auth *ap) Used for describing RPC authentication information messages. This routine is useful for users who wish to generate RPC-style messages without using the RPC package. bool_t xdr_pmap(XDR *xdrs, struct pmap *regs) Used for describing parameters to various portmap procedures, externally. This routine is useful for users who wish to generate these parameters without using the pmap interface. bool_t xdr_pmaplist(XDR *xdrs, struct pmaplist **rp) Used for describing a list of port mappings, externally. This routine is useful for users who wish to generate these parameters without using the pmap interface. bool_t xdr_rejected_reply(XDR *xdrs, struct rejected_reply *rr) Used for describing RPC reply messages. This routine is useful for users who wish to generate RPC-style messages without using the RPC package. bool_t xdr_replymsg(XDR *xdrs, struct rpc_msg *rmsg) Used for describing RPC reply messages. This routine is useful for users who wish to generate RPC style messages without using the RPC package. void xprt_register(SVCXPRT *xprt) After RPC service transport handles are created, they should register themselves with the RPC service package. This routine modifies the global variable svc_fds. Service implementors usually do not need this routine. void xprt_unregister(SVCXPRT *xprt) Before an RPC service transport handle is destroyed, it should unregister itself with the RPC service package. This routine modifies the global variable svc_fds. Service implementors usually do not need this routine. SEE ALSO rpc_clnt_cr(3R), xdr(3R), IRIX Network Programming Guide.