sn0log(1M)

NAME
     sn0log - Read Origin and Onyx2 CPU flash PROM log(s)

SYNOPSIS
     sn0log [ -wscih ] [ -a | hub_mon_device ]

DESCRIPTION
     sn0log is run at system boot by /etc/rc2.d/S33sn0start.

     It displays any messages that were written to one or all CPU board flash
     PROM logs since the last time a sync mark was written to the log(s).  If
     the -s option is used, a sync mark is automatically written to the
     log(s).

     Messages in a CPU board flash PROM log may include analysis data for a
     prior system crash.

     The options are:

     -a   Specifies that all CPU board flash PROM logs in the system should be
          processed.  Otherwise, a single hub_mon_device must be specified.

     -s   Specifies that the messages should be appended to /var/adm/SYSLOG,
          and that a sync mark should be written to the log(s) marking the
          amount of data already transferred from the log(s).

     -w   Specifies that the whole log(s) should be output, not just the
          contents since the last sync mark was written.

     -c   Clears the PROM log contents. Must have the following capabilities
          CAP_DEVICE_MGT, CAP_SYSINFO_MGT and CAP_SHUTDOWN to use this
          function.

     -i   Initializes and clears the PROM logs contents. Must have the
          following capabilities CAP_DEVICE_MGT, CAP_SYSINFO_MGT and
          CAP_SHUTDOWN to use this function.

     -h   Print a short summary of the available options.  This option causes
          an immediate unsuccessful exit.

SEE ALSO
     syslog(3C).