gfxtopology(1G)

NAME
     gfxtopology - graphics topology information

SYNOPSIS
     /usr/gfx/gfxtopology

DESCRIPTION
     The gfxtopology command extracts information about the graphics pipes,
     keyboards, and mice attached to the system from the hardware graph and
     /etc/ioconfig.conf.  This information is then displayed to relate the
     physical location of the devices to the logical configuration from
     ioconfig.conf.

     The first section of the gfxtopology output describes the brick that the
     G brick is attached to, as well as the information for the GE board of
     that pipe.

     The second section describes the physical location of the mouse and
     keyboard corresponding to the listed /hw/input directory.

EXAMPLE
     The following output from gfxtopology that has 6 pipes attached, and has
     8 keyboards and 5 mice attached.

     # /usr/gfx/gfxtopology

     pipe 0  g @ 001c07/I:11 GE14-4 030-1129-002 A DDR438
     pipe 1  g @ 001c10/X:10 GE16-4 030-1398-001 E KDK504
     pipe 2  g @ 011c07/I:10 GE16-4 030-1398-001 E KGF788
     pipe 3  g @ 011c10/I:10 GE16-4 030-1398-001 E KCJ540
     pipe 4  g @ 011c13/I:10 GE14-4 030-1129-002 K FSY253
     pipe 5  g @ 011c16/I:10 GE16-4 030-1398-001 E KWH011

     input   k @ 001c07/I:1/1        m @ 001c07/I:1/2
     input1  k @ 011c07/I:1/1 *      m @ 011c07/I:1/1 *
     input2  k @ 011c07/I:1/3        m @ 011c07/I:1/4
     input3  k @ 011c07/I:2/1        m @ 011c07/I:2/1
     input4  k @ 011c07/I:2/3        m @ 011c10/I:1/1
     input5  k @ 011c07/I:2/4
     input6  k @ 011c10/I:1/1
     input7  k @ 011c10/I:1/3
     * - missing device

HARDWARE
     This command only works on Onyx2 and Onyx3000 series machines with
     InfiniteReality graphics pipes.

SEE ALSO
     hwgraph(4), ioconfig(1M)