Section 3dm

556 pages across all releases.

• afCloseFile(3dm) afCloseFile - close an audio file, update file header if file was opened for write access.
• afFreeFileSetup(3dm) afFreeFileSetup - deallocates an AFfilesetup structure
• afGetAESChannelData(3dm) afGetAESChannelData, afSetAESChannelData - get/set AES channel status information in an AFfilehandle structure for an audio track
• afGetChannels(3dm) afGetChannels, afGetVirtualChannels - get the number of interleaved track / virtual channels from an AFfilehandle structure for an audio track
• afGetCompression(3dm) afGetCompression, afGetCompressionParams - get the compression type and parameters for an audio track from an AFfilehandle structure
• afGetFD(3dm) afGetFD - get the Unix file descriptor for the file associated with an AFfilehandle structure
• afGetFormatParams(3dm) afGetFormatParams - get the audio data format in an AFfilehandle for a specified audio track via dmParams
• AFgetframecnt(3dm) afGetFrameCount, AFgetframecnt, afGetTrackBytes, afGetDataOffset - get the total sample frame count / data bytes / data offset for a specified audio track from an AFfilehandle structure
• afGetFrameSize(3dm) afGetFrameSize, afGetVirtualFrameSize - get the track / virtual frame size in bytes for a specified audio track from an AFfilehandle structure
• afGetInstIDs(3dm) afGetInstIDs - get a list of instrument configurations from an AFfilehandle
• afGetInstParamLong(3dm) afGetInstParams, afSetInstParams, afGetInstParamLong, afSetInstParamLong - get / set a parameter list / long parameter value for an instrument configuration in an AFfilehandle structure
• afGetLoopIDs(3dm) afGetLoopIDs - get a number and list of loop ID's for an instrument configuration
• afGetLoopStart(3dm) afGetLoopStart, afGetLoopEnd, afGetLoopTrack, afGetLoopMode - get the start/end markers, play mode, and track from an AFfilehandle structure for a specified loop.
• afGetLoopStartFrame(3dm) afGetLoopStartFrame, afGetLoopEndFrame, afGetLoopCount - get the start/end frame and loop count from an AFfilehandle structure for a specified loop.
• afGetMarkIDs(3dm) afGetMarkIDs - get the number and list of marker ID's for an audio track
• afGetMarkName(3dm) afGetMarkName, afGetMarkComment - get the name or comment string for a given marker id in an audio track
• AFgetmarkpos(3dm) afGetMarkPosition, AFgetmarkpos, afSetMarkPosition, AFsetmarkpos - get/set the position of a marker in an audio track
• afGetMiscIDs(3dm) afGetMiscIDs, afGetMiscType, afGetMiscSize - get number and list of miscellaneous chunk ID's for a file, get the data type and size for a miscellaneous data chunk.
• afGetPCMMapping(3dm) afGetPCMMapping, afGetVirtualPCMMapping - get the track / virtual PCM mapping values for a specified audio track from an AFfilehandle structure
• afGetRate(3dm) afGetRate, afGetVirtualRate - get the track/virtual sample rate for a specified audio track from an AFfilehandle structure
• AFgetsampfmt(3dm) afGetSampleFormat, AFgetsampfmt, afGetVirtualSampleFormat, afGetByteOrder, afGetVirtualByteOrder - get the track / virtual sample format or byte order for a specified audio track from an AFfilehandle structure.
• afGetTrackIDs(3dm) afGetTrackIDs - get the list of track descriptor id's for the given AFfilehandle
• afIdentifyFD(3dm) afIdentifyFD, afIdentifyNamedFD, afGetFileFormat, AFgetfilefmt - retrieve the audio file format of a file descriptor / open AFfilehandle
• afInitAESChannelData(3dm) afInitAESChannelData, afInitAESChannelDataTo - set a flag in an AFfilesetup so that storage space for AES channel status data is reserved in / removed from a file.
• afInitCompression(3dm) afInitCompression, afInitCompressionParams, afAware - configure the audio compression type and parameters in an AFfilesetup structure for an audio track
• afInitDataOffset(3dm) afInitDataOffset, afInitFrameCount - initialize the audio data byte offset / frame count in an AFfilesetup for a specified raw-format audio track
• AFinitfilefmt(3dm) afInitFileFormat, AFinitfilefmt - initialize the audio file format type in an AFfilesetup structure
• afInitFormatParams(3dm) afInitFormatParams - initialize the audio data format in an AFfilesetup for a specified audio track via dmParams
• afInitInstIDs(3dm) afInitInstIDs - specify a list of instrument parameter chunk identifiers to be stored in an AFfilesetup structure.
• afInitLoopIDs(3dm) afInitLoopIDs - initialize a list of loop ID's for a given instrument in an AFfilesetup structure
• afInitMarkIDs(3dm) afInitMarkIDs - specify a list of marker ID's for a new audio file in an AFfilesetup structure
• afInitMarkName(3dm) afInitMarkName, afInitMarkComment - initialize the name/comment for a specified marker in an AFfilesetup structure
• afInitMiscIDs(3dm) afInitMiscIDs, afInitMiscType, afInitMiscSize - initialize the list of miscellaneous data chunk ID's in an AFfilesetup file configuration structure, initialize the chunk type and number of data bytes for a given miscellaneous chunk.
• afInitPCMMapping(3dm) afInitPCMMapping - configure the PCM mapping for an audio track in an AFfilesetup structure
• AFinitsampfmt(3dm) afInitSampleFormat, AFinitsampfmt, afInitByteOrder, afInitChannels, afInitRate - initialize the audio data format in an AFfilesetup for a specified audio track
• afInitTrackIDs(3dm) afInitTrackIDs - initialize the list of audio track identifiers in an AFfilesetup structure.
• afIntro(3dm) afIntro, AFintro - Introduction to the Silicon Graphics Audio File Library (AF)
• afNewFileSetup(3dm) afNewFileSetup - create and initialize an AFfilesetup structure
• afOpenFile(3dm) afOpenFile, afOpenFD, afOpenNamedFD - allocate an AFfilehandle structure for an audio file identified by name / by a Unix file descriptor
• afQuery(3dm) afQuery, afQueryLong, afQueryDouble, afQueryPointer - retrieve static parameters associated with the Audio File Library formats
• afReadFrames(3dm) afReadFrames - read sample frames from a specified audio track in an audio file
• afReadMisc(3dm) afReadMisc, afWriteMisc, afSeekMisc - read from / write to / move logical read/write pointer for data in a miscellaneous chunk in an audio file
• afSaveFilePosition(3dm) afSaveFilePosition, afRestoreFilePosition - save and retrieve logical audio sample read pointer
• afSeekFrame(3dm) afSeekFrame, afTellFrame - move logical file read pointer for a specified audio track to a desired sample frame location / retrieve current value of file read or write pointer.
• afSetChannelMatrix(3dm) afSetChannelMatrix - set the channel mix matrix associated with a given track in an AFfilehandle
• afSetConversionParams(3dm) afSetConversionParams, afGetConversionParams - set/get the parameters associated with format conversion for a specified audio track via dmParams
• afSetErrorHandler(3dm) afSetErrorHandler - supply an alternate error reporting routine to the Audio File Library
• afSetLoopStart(3dm) afSetLoopStart, afSetLoopEnd, afSetLoopMode, afSetLoopTrack - set the start/end markers, play mode, and track in an AFfilehandle structure for a specified loop.
• afSetLoopStartFrame(3dm) afSetLoopStartFrame, afSetLoopEndFrame, afSetLoopCount - set the start/end frame and loop count from an AFfilehandle structure for a specified loop.
• afSetTrackPCMMapping(3dm) afSetTrackPCMMapping - override the current PCM mapping values associated with a given track in an AFfilehandle
• afSetVirtualFormatParams(3dm) afSetVirtualFormatParams, afGetVirtualFormatParams - set/get the virtual audio data format in an AFfilehandle for a specified audio track via dmParams
• afSetVirtualSampleFormat(3dm) afSetVirtualSampleFormat, afSetVirtualByteOrder, afSetVirtualChannels, afSetVirtualRate, afSetVirtualPCMMapping - set the virtual data format for a specified audio track
• afSyncFile(3dm) afSyncFile - write out a consistent snapshot of an audio file without actually closing the file
• afWriteFrames(3dm) afWriteFrames - write audio sample frames to a specified track in an audio file
• alCheckEvent(3dm) alCheckEvent - Looks for an event in the event queue and retrieves it.
• alCloseEventQueue(3dm) alCloseEventQueue - close an audio event queue
• ALcloseport(3dm) ALcloseport - (obsolete) releases resources of an audio port
• alClosePort(3dm) alClosePort - close an audio port
• alConnect(3dm) alConnect - connect two audio I/O resources
• alDeselectEvents(3dm) alDeselectEvents - Deselect event queue from receiving events from a resource.
• alDiscardFrames(3dm) alDiscardFrames - discard audio from an audio port
• alDisconnect(3dm) alDisconnect - delete a connection between two audio I/O resources
• alFixedToDouble(3dm) alFixedToDouble, alDoubleToFixed - convert between AL fixed-point and double-precision floating-point
• alFlushEvents(3dm) alFlushEvents - Flush all events in event queue
• ALfreeconfig(3dm) ALfreeconfig - (obsolete) deallocates an audio ALconfig structure
• alFreeConfig(3dm) alFreeConfig - deallocates an audio ALconfig structure
• alFreeEvent(3dm) alFreeEvent - deallocates an audio ALevent structure
• ALgetchannels(3dm) ALgetchannels, ALsetchannels - (obsolete) get/set the channel setting in an audio ALconfig structure
• alGetChannels(3dm) alGetChannels, alSetChannels - get/set the channel setting in an audio ALconfig
• ALgetconfig(3dm) ALgetconfig, ALsetconfig - (obsolete) get/set the ALconfig structure of an audio ALport structure
• alGetConfig(3dm) alGetConfig, alSetConfig - get/set the ALconfig of an audio ALport
• ALgetdefault(3dm) ALgetdefault - (obsolete) returns the default value for an audio device state variable
• alGetDevice(3dm) alSetDevice, alGetDevice - get/set the device setting in an audio ALconfig structure
• alGetErrorString(3dm) alGetErrorString - get a string corresponding to an Audio Library error code
• alGetEventData(3dm) alGetEventData - gets data from certain events with non-scalar parameters.
• alGetEventParam(3dm) alGetEventParam - get parameter of audio event
• alGetEventQueueFD(3dm) alGetEventQueueFD - get the file descriptor for an audio event queue
• alGetEventResource(3dm) alGetEventResource - Return audio resource that posted event
• alGetEventSrcResource(3dm) alGetEventSrcResource - Return audio resource that generated event
• alGetEventUST(3dm) alGetEventUST - get Unadjusted System Time of audio event
• alGetEventValue(3dm) alGetEventValue - get ALvalue of audio event
• ALgetfd(3dm) ALgetfd - (obsolete) get the file descriptor for an audio port
• alGetFD(3dm) alGetFD - get the file descriptor for an audio port
• ALgetfillable(3dm) ALgetfillable - (obsolete) report the number of unfilled sample locations in an audio port
• alGetFillable(3dm) alGetFillable - report the number of unfilled sample frames in an audio port
• ALgetfilled(3dm) ALgetfilled - (obsolete) return the number of filled sample locations in an audio port
• alGetFilled(3dm) alGetFilled - return the number of filled sample frames in an audio port
• ALgetfillpoint(3dm) ALgetfillpoint, ALsetfillpoint - (obsolete) control select() or poll() behavior of an audio port
• alGetFillPoint(3dm) alGetFillPoint, alSetFillPoint - get or set low- or high-water mark for an audio port
• ALgetfloatmax(3dm) ALgetfloatmax, ALsetfloatmax - (obsolete) get/set the maximum value of floating point sample data.
• alGetFloatMax(3dm) alGetFloatMax, alSetFloatMax - get/set the maximum value of floating point sample data.
• ALgetframenumber(3dm) ALgetframenumber - (obsolete) Get the absolute sample frame number associated with a port
• alGetFrameNumber(3dm) alGetFrameNumber - Get the absolute sample frame number associated with a port
• ALgetframetime(3dm) ALgetframetime - (obsolete) Get the time at which a sample frame came in or will go out
• alGetFrameTime(3dm) alGetFrameTime - Get the time at which a sample frame came in or will go out
• alGetLimiting(3dm) alGetLimiting, alSetLimiting - request limiting for AL floating-point output
• ALgetminmax(3dm) ALgetminmax - (obsolete) gets maximum and minimum values for an audio device state variable
• ALgetname(3dm) ALgetname - (obsolete) returns a name for an audio device state variable
• alGetParamInfo(3dm) alGetParamInfo - get information about a parameter on a particular audio resource
• ALgetparams(3dm) ALgetparams, ALsetparams - (obsolete) get/set the value of the specified audio device states
• alGetParams(3dm) alGetParams - get the values of audio resource parameters
• ALgetqueuesize(3dm) ALgetqueuesize, ALsetqueuesize - (obsolete) get/set audio port buffer size information in an ALconfig structure
• alGetQueueSize(3dm) alGetQueueSize, alSetQueueSize - get/set audio port buffer size
• alGetResource(3dm) alGetResource - get the resource associated with an audio port
• alGetResourceByName(3dm) alGetResourceByName - find an audio resource by name
• ALgetsampfmt(3dm) ALgetsampfmt, ALsetsampfmt - (obsolete) get/set the sample format setting in an audio ALconfig structure
• alGetSampFmt(3dm) alGetSampFmt, alSetSampFmt - get/set the sample format setting in an audio ALconfig structure
• ALgetstatus(3dm) ALgetstatus - get information concerning the most recent error in the audio stream associated with a port.
• ALgetwidth(3dm) ALsetwidth, ALgetwidth - (obsolete) get/set the sample width setting in an audio ALconfig structure
• alGetWidth(3dm) alSetWidth, alGetWidth - get/set the wordsize for integer audio data
• alIntro(3dm) alIntro, audio - Introduction to the Silicon Graphics Audio Library (AL)
• alIsSubtype(3dm) alIsSubtype - indicate if one resource type is a subtype of another
• ALnewconfig(3dm) ALnewconfig - create and initialize an audio ALconfig structure
• alNewConfig(3dm) alNewConfig - create and initialize an audio ALconfig structure
• alNewEvent(3dm) alNewEvent - create and initialize an audio ALevent structure
• alNextEvent(3dm) alNextEvent - Retrieves front most event from queue
• alOpenEventQueue(3dm) alOpenEventQueue - open an audio event queue
• ALopenport(3dm) ALopenport - (obsolete) open an audio port
• alOpenPort(3dm) alOpenPort - open an audio port
• alParams(3dm) alParams - Audio Library parameters
• alPendingEvents(3dm) alPendingEvents - Get total number of event queued in event queue
• ALqueryparams(3dm) ALqueryparams - (obsolete) get descriptor/description pairs for audio device state variables
• alQueryValues(3dm) alQueryValues - get the set of possible values for a parameter
• alReadBuffers(3dm) alReadBuffers - read flexibly interleaved or non-interleaved audio data from an audio port
• alReadFrames(3dm) alReadFrames - read interleaved sample frames from an audio port
• ALreadsamps(3dm) ALreadsamps - (obsolete) read samples from an audio port
• alResources(3dm) alResources - Audio Library resources
• alSelectEvents(3dm) alSelectEvents - Setup event queue to receive audio events.
• ALseterrorhandler(3dm) ALseterrorhandler - (obsolete) establish an alternate audio error handling routine
• alSetErrorHandler(3dm) alSetErrorHandler - establish an alternate audio error handling routine
• alSetParams(3dm) alSetParams - set the values of audio resource parameters
• alWriteBuffers(3dm) alWriteBuffers - write flexibly interleaved or non-interleaved audio data to an audio port
• alWriteFrames(3dm) alWriteFrames - write interleaved sample frames to an audio port
• ALwritesamps(3dm) ALwritesamps - (obsolete) write samples to an audio port
• alZeroFrames(3dm) alZeroFrames - write zero-valued sample frames to an audio port
• AUchecklicense(3dm) AUchecklicense - checks for a given audio compression license
• AUpvnew(3dm) AUpvlist, AUpvnew, AUpvfree, AUpvgetmaxitems, AUpvsetvaltype, AUpvsetparam, AUpvsetval, AUpvgetvaltype, AUpvgetparam, AUpvgetval - Audio File parameter value list data type
• CDaddcallback(3dm) CDaddcallback - set a callback for the CD audio data parser
• CDallowremoval(3dm) CDallowremoval - unlock the CD-ROM drive eject button
• CDatomsf(3dm) CDatomsf - convert ASCII string to minutes, seconds, frames
• CDatotime(3dm) CDatotime - convert ASCII string to timecode
• CDbestreadsize(3dm) CDbestreadsize - tells best num_frames value for CDreadda
• CDclose(3dm) CDclose - closes a CD-ROM device
• CDcreateparser(3dm) CDcreateparser - creates a CD digital audio data parser
• CDdeleteparser(3dm) CDdeleteparser - deletes a CD digital audio data parser
• CDeject(3dm) CDeject - ejects the caddy from the CD-ROM drive
• CDframetomsf(3dm) CDframetomsf - convert CD frame number to minutes, seconds, frame
• CDframetotc(3dm) CDframetotc - convert CD frame number to timecode
• CDgetstatus(3dm) CDgetstatus - get current state of a CD-ROM drive
• CDgettrackinfo(3dm) CDgettrackinfo - get information about a specified track on an audio CD
• CDintro(3dm) CDintro - Introduction to the Silicon Graphics CD Audio Library (CD)
• CDmsftoblock(3dm) CDmsftoblock - convert time to logical block number
• CDmsftoframe(3dm) CDmsftoframe - convert time to CD frame number
• CDopen(3dm) CDopen - opens a CD-ROM drive for audio use
• CDparseframe(3dm) CDparseframe - parse a frame of CD digital audio data
• CDplay(3dm) CDplay - play an audio CD through CD-ROM audio jacks
• CDplayabs(3dm) CDplayabs - play an audio CD (beginning at a specified absolute time location) through CD-ROM audio jacks
• CDplaytrack(3dm) CDplaytrack - play a specified track from an audio CD through CD-ROM audio jacks
• CDplaytrackabs(3dm) CDplaytrackabs - play a track from an audio CD (beginning at a specified absolute time location) through CD-ROM audio jacks
• CDpreventremoval(3dm) CDpreventremoval - lock the CD-ROM drive eject button
• CDreadda(3dm) CDreadda - read digital audio data from audio CD in CD-ROM
• CDremovecallback(3dm) CDremovecallback - remove a callback from the CD audio data parser
• CDresetparser(3dm) CDresetparser - resets a CD digital audio data parser
• CDsbtoa(3dm) CDsbtoa - convert six-bit country and owner codes to ASCII string
• CDseek(3dm) CDseek, CDseekupdate - set read pointer for CD-ROM to absolute time code location
• CDseekblock(3dm) CDseekblock, CDseekblockupdate - set read pointer for CD-ROM to start of specified block
• CDseektrack(3dm) CDseektrack, CDseektrackupdate - set read pointer for CD-ROM to start of specified track
• CDstop(3dm) CDstop - stops play of an audio CD in CD-ROM drive
• CDtctoframe(3dm) CDtctoframe - convert timecode to CD frame number
• CDtimetoa(3dm) CDtimetoa - convert timecode to ASCII string
• CDtogglepause(3dm) CDtogglepause - toggles a CD-ROM drive between pause and play
• cl_aware(3dm) cl_aware, CLaware - Aware Audio Schemes in the Compression Library
• cl_cosmo(3dm) cl_cosmo - Cosmo Compress JPEG Accelerator (in the Compression Library)
• cl_jpeg(3dm) cl_jpeg - JPEG schemes in the Compression Library
• cl_mpeg1(3dm) cl_mpeg1 - MPEG-1 schemes in the Compression Library
• cl_mvc2(3dm) cl_mvc2 - MVC2 scheme in the Compression Library
• cl_mvc3(3dm) cl_mvc3 - MVC3 scheme in the Compression Library
• clAddAlgorithm(3dm) clAddAlgorithm, clSetUnique, clGetUnique, clFetchParam, clStoreParam, clError - Add a video or audio compression algorithm to the Compression Library
• clAddParam(3dm) clAddParam, clSetDefault, clSetMin, clSetMax, clSetMinMax, clSetRange - Add a video or audio compression parameter to the Compression Library
• clCompressImage(3dm) clCompressImage, clDecompressImage - Compress/Decompress a single image
• clCreateBuf(3dm) clCreateBuf, clDestroyBuf, clQueryBufferHdl, clQueryHandle - Create and destroy implicit buffers, and find related handles.
• clGetDefault(3dm) clGetDefault - Get the default value of a parameter
• clGetMinMax(3dm) clGetMinMax - Get minimum and maximum values for a parameter
• clGetName(3dm) clGetName - returns a name for a parameter
• clGetNextImageInfo(3dm) clGetNextImageInfo - Get information about a compressed image stream
• clGetParams(3dm) clGetParams, clSetParams, clGetParam, clSetParam - get and set the value of the specified parameters.
• CLintro(3dm) CLintro, CompressionLibrary, compression, libcl, cl - A library for working with compressed video and audio data
• clOpenCompressor(3dm) clOpenCompressor, clCompress, clCloseCompressor - Compress a video or audio stream
• clOpenDecompressor(3dm) clOpenDecompressor, clDecompress, clCloseDecompressor - Decompress a video or audio stream
• clOpenDemux(3dm) clOpenDemux, clDemux, clCloseDemux - Demultiplex into video and audio streams
• clOpenMux(3dm) clOpenMux, clMux, clCloseMux - Multiplex video and audio streams
• clQueryAlgorithms(3dm) clQueryAlgorithms, clQuerySchemeFromHandle, clQuerySchemeFromName, clGetAlgorithmName, clQueryLicense - Get a list of algorithms, find the identifier or name, or check for a license
• clQueryFree(3dm) clQueryFree, clUpdateHead, clQueryValid, clUpdateTail, clDoneUpdatingHead - Reading and writing data with implicit buffers
• clQueryParams(3dm) clQueryParams, clGetParamID - Get a list of the parameters for a specified processing object, or the parameter identifier given the name
• clQueryScheme(3dm) clQueryScheme, clQueryMaxHeaderSize, clReadHeader - Determine the scheme and read the stream header
• clSetErrorHandler(3dm) clSetErrorHandler - Select an alternate error handling routine
• dm_dv(3dm) dm_dv - DV and DVCPRO image and audio compression programming with dmIC, dmAC and dmBuffers
• dm_jpeg(3dm) dm_jpeg - JPEG compression programming with dmIC and dmBuffers
• dmACConvert(3dm) dmACConvert - convert audio data format, sampling rate and compression
• dmACCreate(3dm) dmACCreate, dmACDestroy - create/destroy a DMaudioconverter handle used for audio format conversion.
• dmACGetMinInputSize(3dm) dmACGetMinInputSize, dmACGetMinOutputSize - auxiliary routines for querying input and output buffer sizes for dmACConvert.
• dmACReset(3dm) dmACReset - reset a DMaudioconverter handle to its default state
• dmACSetParams(3dm) dmACSetParams, dmACGetParams - set/get the Audio Converter parameter values
• dmAudioRateConvert(3dm) dmAudioRateConvert - convert data sampling rate. It consumes an input buffer of floats and generates an output buffer of floats.
• dmAudioRateConverterCreate(3dm) dmAudioRateConverterCreate - allocate new DMaudiorateconverter structure
• dmAudioRateConverterDestroy(3dm) dmAudioRateConverterDestroy - deallocate an audio converter
• dmAudioRateConverterGetParams(3dm) dmAudioRateConverterGetParams - get rate converter parameter values
• dmAudioRateConverterReset(3dm) dmAudioRateConverterReset - fill internal buffers with constant value
• dmAudioRateConverterSetParams(3dm) dmAudioRateConverterSetParams - set rate converter parameter values
• dmbufalloc(3dm) dmBufferAllocate, dmBufferAllocateSize, dmBufferAttach, dmBufferFree, dmBufferGetAllocSize - allocate and free a DMbuffer
• dmbufcreate(3dm) dmBufferSetPoolDefaults, dmBufferCreatePool, dmBufferDestroyPool - create DMbufferpool
• dmbuffd(3dm) dmBufferGetPoolFD, dmBufferSetPoolSelectSize - configure DMbufferpool file descriptor
• dmbufglparams(3dm) dmBufferGetGLPoolParams - configures pool parameters required for use by graphics
• dmbufmap(3dm) dmBufferMapData - map DMbuffer memory
• dmbufsize(3dm) dmBufferGetSize, dmBufferSetSize - set and get DMbuffer data size
• dmbufstate(3dm) dmBufferGetPoolState - query available space in pool
• dmbuftype(3dm) dmBufferGetImageType, dmBufferSetImageType - set and get the DMimagetype of a DMbuffer
• dmbufuserdata(3dm) dmBufferGetUserData, dmBufferSetUserData - get and set user data for a buffer
• dmbufustmsc(3dm) dmBufferGetUSTMSCpair, dmBufferSetUSTMSCpair - get and set unadjusted system time and media stream counter value pair
• dmColor(3dm) dmColor - The Silicon Graphics Color Space Library (CSL)
• dmColorConvert(3dm) dmColorConvert - performs the actual image conversion.
• dmColorCreate(3dm) dmColorCreate - creates and initializes the color converter.
• dmColorDestroy(3dm) dmColorDestroy - destroys the color converter.
• dmColorGetError(3dm) dmColorGetError - returns the value of the error flag.
• dmColorGetErrorString(3dm) dmColorGetErrorString - returns a text error message.
• dmColorGetSrcSize(3dm) dmColorGetSrcSize, dmColorGetDstSize - get the source/destination image size in bytes.
• dmColorPrecompute(3dm) dmColorPrecompute - performs any precomputation required.
• dmColorSetBrightness(3dm) dmColorSetBrightness, dmColorGetBrightness - set/get brightness delta value.
• dmColorSetContrast(3dm) dmColorSetContrast, dmColorGetContrast - set/get the contrast multiplier.
• dmColorSetConvParams(3dm) dmColorSetConvParams, dmColorGetConvParams - set/get the conversion parameters.
• dmColorSetDefaultAlpha(3dm) dmColorSetDefaultAlpha, dmColorGetDefaultAlpha - set/get the default alpha value of the source image.
• dmColorSetHue(3dm) dmColorSetHue, dmColorGetHue - set/get the hue rotation.
• dmColorSetSaturation(3dm) dmColorSetSaturation, dmColorGetSaturation - set/get the saturation multiplier.
• dmColorSetSrcParams(3dm) dmColorSetSrcParams, dmColorSetDstParams, dmColorGetSrcParams, dmColorGetDstParams - set/get the source/destination image parameters.
• dmColorSetSubsamplingFilter(3dm) dmColorSetSubsamplingFilter, dmColorGetSubsamplingFilter - set/get the subsampling filter type.
• dmDVAudioDecode(3dm) dmDVAudioDecode - implements DV and DVCPRO audio decompression
• dmDVAudioDecoderCreate(3dm) dmDVAudioDecoderCreate - allocate new DMDVaudiodecoder structure
• dmDVAudioDecoderDestroy(3dm) dmDVAudioDecoderDestroy - deallocate a DMDVaudiodecoder
• dmDVAudioDecoderGetParams(3dm) dmDVAudioDecoderGetParams - get DV audio decoder parameter values
• dmDVAudioDecoderReset(3dm) dmDVAudioDecoderReset - fill decoder internal buffers with zeros.
• dmDVAudioDecoderSetParams(3dm) dmDVAudioDecoderSetParams - set DV Audio decoder parameter values
• dmDVAudioEncode(3dm) dmDVAudioEncode - implements DV and DVCPRO audio encode
• dmDVAudioEncoderCreate(3dm) dmDVAudioEncoderCreate - allocate new DMDVaudioencoder structure
• dmDVAudioEncoderDestroy(3dm) dmDVAudioEncoderDestroy - deallocate a DMDVaudioencoder
• dmDVAudioEncoderGetFrameSize(3dm) dmDVAudioEncoderGetFrameSize - get DV audio encoder frame size
• dmDVAudioEncoderGetParams(3dm) dmDVAudioEncoderGetParams - get DV audio encoder parameter values
• dmDVAudioEncoderReset(3dm) dmDVAudioEncoderReset - fill encoder internal buffers with zeros.
• dmDVAudioEncoderSetParams(3dm) dmDVAudioEncoderSetParams - set DV Audio encoder parameter values
• dmDVAudioHeaderGetParams(3dm) dmDVAudioHeaderGetParams - get DV audio decoder parameter values
• dmDVIAudioDecode(3dm) dmDVIAudioDecode - decode audio data compressed using the IMA (Interactive Multimedia Association) Recommended ADPCM decompression, based on Intel's DVI algorithm.
• dmDVIAudioDecoderCreate(3dm) dmDVIAudioDecoderCreate - allocate new DMDVIaudiodecoder structure
• dmDVIAudioDecoderDestroy(3dm) dmDVIAudioDecoderDestroy - deallocate a DMDVIaudiodecoder
• dmDVIAudioDecoderGetParams(3dm) dmDVIAudioDecoderGetParams - get DVI audio decoder parameter values
• dmDVIAudioDecoderReset(3dm) dmDVIAudioDecoderReset - fill decoder internal buffers with zeros.
• dmDVIAudioDecoderSetParams(3dm) dmDVIAudioDecoderSetParams - set DVI Audio decoder parameter values
• dmDVIAudioEncode(3dm) dmDVIAudioEncode - compress audio data using the IMA (Interactive Multimedia Association) Recommended ADPCM compression, based on Intel's DVI algorithm.
• dmDVIAudioEncoderCreate(3dm) dmDVIAudioEncoderCreate - allocate new DMDVIaudioencoder structure
• dmDVIAudioEncoderDestroy(3dm) dmDVIAudioEncoderDestroy - deallocate a DMDVIaudioencoder
• dmDVIAudioEncoderGetParams(3dm) dmDVIAudioEncoderGetParams - get DVI audio encoder parameter values
• dmDVIAudioEncoderReset(3dm) dmDVIAudioEncoderReset - fill encoder internal buffers with zeros.
• dmDVIAudioEncoderSetParams(3dm) dmDVIAudioEncoderSetParams - set DVI Audio encoder parameter values
• dmedia(3dm) dmedia, dmIntro - Introduction to the IRIS Digital Media Libraries
• dmFS1016Decode(3dm) dmFS1016Decode - implements the US Federal Standard 1016 4800/7200/9600 bits/s CELP (Code Excited Linear Predictive) Voice Coder.
• dmFS1016DecoderCreate(3dm) dmFS1016DecoderCreate - allocate new DMFS1016decoder structure
• dmFS1016DecoderDestroy(3dm) dmFS1016DecoderDestroy - deallocate a DMFS1016decoder
• dmFS1016DecoderGetParams(3dm) dmFS1016DecoderGetParams - get FS1016 decoder parameter values
• dmFS1016DecoderReset(3dm) dmFS1016DecoderReset - fill decoder internal buffers with zeros.
• dmFS1016DecoderSetParams(3dm) dmFS1016DecoderSetParams - set FS1016 decoder parameter values.
• dmFS1016Encode(3dm) dmFS1016Encode - implements the US Federal Standard 1016 4800/7200/9600 bits/s CELP (Code Excited Linear Predictive) Voice Coder.
• dmFS1016EncoderCreate(3dm) dmFS1016EncoderCreate - allocate new DMFS1016encoder structure
• dmFS1016EncoderDestroy(3dm) dmFS1016EncoderDestroy - deallocate a DMFS1016encoder
• dmFS1016EncoderGetParams(3dm) dmFS1016EncoderGetParams - get FS1016 encoder parameter values
• dmFS1016EncoderReset(3dm) dmFS1016EncoderReset - fill encoder internal buffers with zeros.
• dmFS1016EncoderSetParams(3dm) dmFS1016EncoderSetParams - set FS1016 encoder parameter values.
• DMFXDialog(3dm) DMFXDialog - A dialog class for plugins
• dmFXDrawPixels(3dm) dmFXDrawPixels, dmFXConvolve, dmFXScaleBias, dmFXMatrixMultiply - pixel transfer operations for special effects
• dmFXGetDataPtr(3dm) dmFXGetDataPtr, dmFXGetRowLength - return a pointer to the pixels stored in a DMfxbuffer
• dmFXGetDMBuffer(3dm) dmFXGetDMBuffer - return the DMbuffer associated with a DMfxbuffer
• DMFXImageViewer(3dm) DMFXImageViewer - An image viewer class for plugins
• dmFXIsGLExtensionSupported(3dm) dmFXIsGLExtensionSupported - Find out if a GL Extension is supported
• dmFXJoinFields(3dm) dmFXJoinFields - join two fields into a single frame
• dmFXMergeResources(3dm) dmFXMergeResources - load and merge plugin resources with those of the parent application
• dmFXSplitFields(3dm) dmFXSplitFields - split a frame out into two fields
• dmFXTexImage2D(3dm) dmFXTexImage2D - load an image for use as a texture for special effects
• dmFXUpdateImageBuffer(3dm) dmFXUpdateImageBuffer, dmFXUpdateImageBuffers, dmFXGetBufferFormat - change the active size of a special effects buffer
• dmG711(3dm) dmG711MulawEncode, dmG711MulawDecode, dmG711MulawZeroTrapEncode, dmG711MulawZeroTrapDecode, dmG711AlawEncode, dmG711AlawDecode, dmG711MulawToAlaw, dmG711AlawToMulaw, dmSunMulawEncode, dmSunMulawDecode, dmNeXTMulawEncode, dmNeXTMulawDecode - G.711 mu-law, A-law conversion routines
• dmG722Decode(3dm) dmG722Decode - implements the ITU (International Telecommunication Union) Recommendation G.722 decompression.
• dmG722DecoderCreate(3dm) dmG722DecoderCreate - allocate new DMG722decoder structure
• dmG722DecoderDestroy(3dm) dmG722DecoderDestroy - deallocate an DMG722decoder
• dmG722DecoderGetParams(3dm) dmG722DecoderGetParams - get G722 decoder parameter values
• dmG722DecoderReset(3dm) dmG722DecoderReset - fill decoder internal buffers with zeros.
• dmG722Encode(3dm) dmG722Encode - implements the ITU (International Telecommunication Union) Recommendation G.722 compression.
• dmG722EncoderCreate(3dm) dmG722EncoderCreate - allocate new DMG722encoder structure
• dmG722EncoderDestroy(3dm) dmG722EncoderDestroy - deallocate an DMG722encoder
• dmG722EncoderGetParams(3dm) dmG722EncoderGetParams - get G722 encoder parameter values
• dmG722EncoderReset(3dm) dmG722EncoderReset - fill encoder internal buffers with zeros.
• dmG726Decode(3dm) dmG726Decode - implements ITU (International Telecommunication Union) Recommendation G.726 ADPCM decompression for input compressed bit stream of 40, 32 ,24, or 16 kbit/s and output data of 64 kbit/s A-law, mu-law, or linear PCM. G.726 replaced G.721 and G.723.
• dmG726DecoderCreate(3dm) dmG726DecoderCreate - allocate new DMG726decoder structure
• dmG726DecoderDestroy(3dm) dmG726DecoderDestroy - deallocate a DMG726decoder
• dmG726DecoderGetParams(3dm) dmG726DecoderGetParams - get G726 decoder parameter values
• dmG726DecoderReset(3dm) dmG726DecoderReset - fill decoder internal buffers with zeros.
• dmG726DecoderSetParams(3dm) dmG726DecoderSetParams - set G726 decoder parameter values
• dmG726Encode(3dm) dmG726Encode - implements ITU (International Telecommunication Union) Recommendation G.726 ADPCM compression for input of 64 kbit/s A-law, mu- law, or linear data and output of compressed bit stream of 40, 32 ,24, or 16 kbit/s. G.726 replaced G.721 and G.723.
• dmG726EncoderCreate(3dm) dmG726EncoderCreate - allocate new DMG726encoder structure
• dmG726EncoderDestroy(3dm) dmG726EncoderDestroy - deallocate a DMG726encoder
• dmG726EncoderGetParams(3dm) dmG726EncoderGetParams - get G726 encoder parameter values
• dmG726EncoderReset(3dm) dmG726EncoderReset - fill encoder internal buffers with zeros.
• dmG726EncoderSetParams(3dm) dmG726EncoderSetParams - set G726 encoder parameter values
• dmG728Decode(3dm) dmG728Decode - implements the ITU (International Telecommunication Union) Recommendation G.728 decompression (LD-CELP).
• dmG728DecoderCreate(3dm) dmG728DecoderCreate - allocate new DMG728decoder structure
• dmG728DecoderDestroy(3dm) dmG728DecoderDestroy - deallocate a DMG728decoder
• dmG728DecoderGetParams(3dm) dmG728DecoderGetParams - get G728 decoder parameter values
• dmG728DecoderReset(3dm) dmG728DecoderReset - fill decoder internal buffers with zeros.
• dmG728DecoderSetParams(3dm) dmG728DecoderSetParams - set G728 decoder parameter values.
• dmG728Encode(3dm) dmG728Encode - implements the ITU (International Telecommunication Union) Recommendation G.728 compression (LD-CELP).
• dmG728EncoderCreate(3dm) dmG728EncoderCreate - allocate new DMG728encoder structure
• dmG728EncoderDestroy(3dm) dmG728EncoderDestroy - deallocate a DMG728encoder
• dmG728EncoderGetParams(3dm) dmG728EncoderGetParams - get G728 encoder parameter values
• dmG728EncoderReset(3dm) dmG728EncoderReset - fill encoder internal buffers with zeros.
• dmGetError(3dm) dmGetError, dmGetErrorForPID - retrieve an error number, message, and detail for Digital Media errors
• dmGetUST(3dm) dmGetUST, dmGetUSTCurrentTimePair - get digital media Unadjusted System Time (UST)
• dmGSMDecode(3dm) dmGSMDecode - implements the European GSM 06.10 provisional standard for full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP (regular pulse excitation/long term prediction) coding at 13 kbit/s.
• dmGSMDecoderCreate(3dm) dmGSMDecoderCreate - allocate new DMGSMdecoder structure
• dmGSMDecoderDestroy(3dm) dmGSMDecoderDestroy - deallocate a DMGSMdecoder
• dmGSMDecoderGetParams(3dm) dmGSMDecoderGetParams - get GSM decoder parameter values
• dmGSMDecoderReset(3dm) dmGSMDecoderReset - fill decoder internal buffers with zeros.
• dmGSMEncode(3dm) dmGSMEncode - implements the European GSM 06.10 provisional standard for full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP (regular pulse excitation/long term prediction) coding at 13 kbit/s.
• dmGSMEncoderCreate(3dm) dmGSMEncoderCreate - allocate new DMGSMencoder structure
• dmGSMEncoderDestroy(3dm) dmGSMEncoderDestroy - deallocate a DMGSMencoder
• dmGSMEncoderGetParams(3dm) dmGSMEncoderGetParams - get GSM encoder parameter values
• dmGSMEncoderReset(3dm) dmGSMEncoderReset - fill encoder internal buffers with zeros.
• dmicanytoany(3dm) dmICAnyToAny, - Any to Any image conversion utility function
• dmicchoose(3dm) dmICChooseConverter - return an image converter that matches specified image parameters
• dmicconv(3dm) dmICSetConvParams, dmICGetConvParams, dmICGetDefaultConvParams - manipulate conversion controls of an image converter context
• dmicdst(3dm) dmICSetDstParams, dmICGetDstParams, dmICGetDefaultDstParams - manipulate image converter context dst image format
• dmicgetnum(3dm) dmICGetNum, dmICGetDescription - find out about available image converters
• dmicopen(3dm) dmICCreate, dmICDestroy - create and destroy image converter context
• dmicpool(3dm) dmICGetSrcPoolParams, dmICGetDstPoolParams, dmICSetDstPool - get the input/output buffering needs of the image converter
• dmicqueue(3dm) dmICGetDstQueueFD, dmICGetSrcQueueFilled, dmICGetDstQueueFilled - image converter queue management
• dmicreceive(3dm) dmICReceive, - transfer output from the image converter
• dmicsend(3dm) dmICSend, - transfer input to the image converter context
• dmicsrc(3dm) dmICSetSrcParams, dmICGetSrcParams, dmICGetDefaultSrcParams - manipulate image converter context src image format
• dmicwork(3dm) dmICWork, - call the image converter and have it perform a task
• dmLTC(3dm) dmLTCDecoderCreate, dmLTCDecoderSetParams, dmLTCDecode, dmLTCDecoderDestroy - decode linear timecode (LTC)
• dmMPEG1AudioDecode(3dm) dmMPEG1AudioDecode - decodes a single compressed block of data created by a call to dmMPEG1AudioEncode(3dm).
• dmMPEG1AudioDecoderCreate(3dm) dmMPEG1AudioDecoderCreate - allocate new DMMPEG1audiodecoder structure.
• dmMPEG1AudioDecoderDestroy(3dm) dmMPEG1AudioDecoderDestroy - deallocate a DMMPEG1audiodecoder
• dmMPEG1AudioDecoderReset(3dm) dmMPEG1AudioDecoderReset - fill decoder internal buffers with zeros.
• dmMPEG1AudioEncode(3dm) dmMPEG1AudioEncode - Compresses a single block of audio data using MPEG1 audio compression algorithm.
• dmMPEG1AudioEncoderCreate(3dm) dmMPEG1AudioEncoderCreate - allocate new DMMPEG1audioencoder structure.
• dmMPEG1AudioEncoderDestroy(3dm) dmMPEG1AudioEncoderDestroy - deallocate a DMMPEG1audioencoder
• dmMPEG1AudioEncoderReset(3dm) dmMPEG1AudioEncoderReset - fill encoder internal buffers with zeros.
• dmMPEG1AudioEncoderSetParams(3dm) dmMPEG1AudioEncoderSetParams, dmMPEG1AudioDecoderSetParams, dmMPEG1AudioEncoderGetParams, dmMPEG1AudioDecoderGetParams - set and query MPEG1 audio encoder/decoder parameter values.
• dmMPEG1AudioFilterStateCreate(3dm) dmMPEG1AudioFilterStateCreate, dmMPEG1AudioFilterStateDestroy - allocates new or frees DMMPEG1audiofilterstate structure.
• dmMPEG1AudioFilterStateSave(3dm) dmMPEG1AudioFilterStateSave, dmMPEG1AudioFilterStateRestore - saves or restores encoder or decoder filter state.
• dmMPEG1AudioHeaderGetBlockBytes(3dm) dmMPEG1AudioHeaderGetBlockBytes - gets expected length in bytes of any compressed data block.
• dmMPEG1AudioHeaderGetParams(3dm) dmMPEG1AudioHeaderGetParams - get decoder parameter information from a header of any compressed MPEG1 audio data block.
• dmnet(3dm) dmNet, dmNetIntro - Digital Media Network Library
• dmnetconnect(3dm) dmNetConnect, dmNetListen, dmNetAccept, dmNetRegisterPool - DMNetConnection connection management
• dmnetdatafd(3dm) dmNetDataFd - return FD associated with a DMNetConnection
• dmnetgetparams(3dm) dmNetGetParams - Get DMparams associated with a DMNetConnection
• dmnetopen(3dm) dmNetOpen, dmNetClose - open/close a dmNet connection to another process
• dmnetregister(3dm) dmNetRegisterPool, dmNetRegisterBuffer - register memory with dmNet
• dmnetsend(3dm) dmNetSend, dmNetRecv - send and receive DMbuffers
• dmParamsCreate(3dm) dmParams: dmParamsCreate, dmParamsDestroy - create and destroy digital media parameter/value lists
• dmParamsFlatten(3dm) dmParamsFlatten, dmParamsUnflatten - convert digital media parameter lists to and from byte strings
• dmParamsGetElem(3dm) dmParamsGetElem, dmParamsGetElemType - obsolete functions to get indexed elements in a digital media parameter/value list
• dmParamsGetInt(3dm) dmParamsGetInt, dmParamsGetEnum, dmParamsGetString, dmParamsGetBinary, dmParamsGetFloat, dmParamsGetFract, dmParamsGetParams - get values from digital media parameter/value lists
• dmParamsGetIntArray(3dm) dmParamsGetIntArray, dmParamsGetEnumArray, dmParamsGetStringArray, dmParamsGetFloatArray, dmParamsGetFractArray - get arrays of values from digital media parameter/value lists
• dmParamsGetIntRange(3dm) dmParamsGetIntRange, dmParamsGetFloatRange, dmParamsGetFractRange - get ranges of values from digital media parameter/value lists
• dmParamsGetNumElems(3dm) dmParamsGetNumElems, dmParamsGetType, dmParamsIsPresent, dmParamsCopyElem, dmParamsCopyAllElems, dmParamsRemoveElem - manipulate the contents of a digital media parameter/value list
• dmParamsScan(3dm) dmParamsScan - scan all entries of a digital media parameter/value list
• dmParamsSetInt(3dm) dmParamsSetInt, dmParamsSetEnum, dmParamsSetString, dmParamsSetBinary, dmParamsSetFloat, dmParamsSetFract, dmParamsSetParams - set values in digital media parameter/value lists
• dmParamsSetIntArray(3dm) dmParamsSetIntArray, dmParamsSetEnumArray, dmParamsSetStringArray, dmParamsSetFloatArray, dmParamsSetFractArray - set array values in digital media parameter/value lists
• dmParamsSetIntRange(3dm) dmParamsSetIntRange, dmParamsSetFloatRange, dmParamsSetFractRange - set range values in digital media parameter/value lists
• dmPMConvertToByteStream(3dm) dmPMConvertToByteStream - saves away a special effect as a byte stream
• dmPMCreateEffect(3dm) dmPMCreateEffect, dmPMCreateEffectByName, dmPMDestroyEffect - create and destroy special effects
• dmPMCreateFromByteStream(3dm) dmPMCreateFromByteStream - recreates a special effect from a byte stream
• dmPMCreateManager(3dm) dmPMCreateManager, dmPMDestroyManager - create and destroy special effects plugin-manager
• dmPMGetAppShell(3dm) dmPMGetAppShell - retrieves the app shell widget used by the plugin- manager
• dmPMGetDefaultPluginPathForType(3dm) dmPMGetDefaultPluginPathForType - return the default path for plugins of a specific type
• dmPMGetName(3dm) dmPMGetName, dmPMGetLocalName, dmPMGetPrefix, dmPMGetPathname, dmPMGetType - retrieve the name, prefix, pathname or type of a plugin
• dmPMGetPlugin(3dm) dmPMGetPlugin, dmPMGetPluginByName, dmPMGetPluginByPathname, dmPMGetPluginFromEffect - retrieve a pointer to a special effects plugin
• dmPMGetPluginCount(3dm) dmPMGetPluginCount - returns the number of initialized plugins
• dmPMGetProperty(3dm) dmPMGetProperty - retrieves a property of the specified plugin
• dmPMGetSourceAUsage(3dm) dmPMGetSourceAUsage, dmPMGetSourceBUsage, dmPMGetDestUsage - retrieves the usage bitmask of the plugin
• dmPMHasDialog(3dm) dmPMHasDialog - determine whether or not a plugin has a setup dialog
• dmPMInitDirectory(3dm) dmPMInitDirectory, dmPMInitDirectoryWithProgress - initializes a directory of plugins
• dmPMInitPlugin(3dm) dmPMInitPlugin, dmPMFreePlugin, dmPMFreeAllPlugins - initializes and frees plugins
• dmPMProcessClip(3dm) dmPMProcessImageClip, dmPMProcessImageClipWithProgress - apply special effects to movies
• dmPMSetAudioCallback(3dm) dmPMSetAudioCallback, dmPMSetVideoCallback - sets the audio and video callbacks
• dmPMSetupAudioFilter(3dm) dmPMSetupAudioFilter, dmPMExecuteAudioFilter, dmPMCleanupAudioFilter - sets up, executes, and cleanups audio filters
• dmPMSetupVideoFilter(3dm) dmPMSetupVideoFilter, dmPMExecuteVideoFilter, dmPMCleanupVideoFilter, dmPMBufferSetupVideoFilter, dmPMBufferExecuteVideoFilter - sets up, executes, and cleanups video filters
• dmPMSetupVideoTransition(3dm) dmPMSetupVideoTransition, dmPMExecuteVideoTransition, dmPMCleanupVideoTransition, dmPMBufferSetupVideoTransition, dmPMBufferExecuteVideoTransition - sets up, executes, and cleanups video transitions
• dmPMSortByName(3dm) dmPMSortByName, dmPMSortByPrefix - sorts the list of plugins stored in the plugin-manager
• dmSetAudioDefaults(3dm) dmSetAudioDefaults, dmAudioFrameSize - parameters for digital-media audio
• dmSetImageDefaults(3dm) dmSetImageDefaults, dmImageFrameSize - parameters for digital-media images
• dmTCAddTC(3dm) dmTCAddTC, dmTCAddFrames - digital media timecode mathematics
• dmTCFramesBetween(3dm) dmTCFramesBetween - digital media timecode mathematics
• dmTCFramesPerDay(3dm) dmTCFramesPerDay - digital media timecode mathematics
• dmTCToSeconds(3dm) dmTCToSeconds, dmTCFromSeconds - digital media timecode mathematics
• dmTCToString(3dm) dmTCToString, dmTCFromString, DMtimecode, tc_type - digital media timecode mathematics
• dmVITC(3dm) dmVITCDecoderCreate, dmVITCDecoderSetStride, dmVITCDecode, dmVITCDecoderDestroy - decode vertical interval timecode (VITC)
• DTaddcallback(3dm) DTaddcallback - set a callback for the DAT audio data parser
• DTatohmsf(3dm) DTatohmsf - convert ASCII string to hours, minutes, seconds, frames
• DTatotime(3dm) DTatotime - convert ASCII string to timecode
• DTcreateparser(3dm) DTcreateparser - creates a DAT audio data parser
• DTdeleteparser(3dm) DTdeleteparser - deletes a DAT audio data parser
• DTframetohmsf(3dm) DTframetohmsf - convert DAT frame number to hours, minutes, seconds, frame
• DTframetotc(3dm) DTframetotc - convert frame number to timecode
• DThmsftoframe(3dm) DThmsftoframe - convert hours, minutes, seconds, frame to DAT frame number.
• DTinctime(3dm) DTinctime - increment a DAT time code
• DTintro(3dm) DTintro - Introduction to the Silicon Graphics DAT Audio Library (DT)
• DTparseframe(3dm) DTparseframe - parse a frame of DAT audio data
• DTpnotodec(3dm) DTpnotodec - convert BCD program number to decimal
• DTremovecallback(3dm) DTremovecallback - remove a callback from the DAT audio data parser
• DTresetparser(3dm) DTresetparser - resets a DAT audio data parser
• DTsbtoa(3dm) DTsbtoa - convert six-bit country and owner codes to ASCII string
• DTsetdate(3dm) DTsetdate - set a date pack to the current time
• DTtctoframe(3dm) DTtctoframe - convert DAT timecode structure to DAT frame number.
• DTtcvalid(3dm) DTtcvalid - check a dat timecode for validity
• DTtimetoa(3dm) DTtimetoa - convert timecode to ASCII string
• fxAllocateImageBuffers(3dm) dmFXAllocateImageBuffers, dmFXFreeImageBuffers - create and destroy image buffers for special effects
• fxMovieRenderImage(3dm) dmFXMovieRenderImage, dmFXMovieInsertImage, dmFXMovieRenderFields, dmFXMovieInsertFields - transfer images between movies and special effects
• fxSetupInputImageBuffer(3dm) dmFXSetupInputImageBuffer, dmFXSetupInputImageBufferWithUsage, dmFXSetupOutputImageBuffer, dmFXCleanupInputImageBuffer, dmFXCleanupOutputImageBuffer - manage special-effects image buffers
• fxSetupScanlineBuffer(3dm) dmFXSetupScanlineBuffer - get information about a special-effects image buffer
• mdClosePort(3dm) mdOpenInPort, mdOpenOutPort, mdClosePort, mdGetFd - open and close MDports
• mdCountReaders(3dm) mdCountReaders, mdCountWriters - count applications using a MIDI device
• mdFree(3dm) mdMalloc, mdFree, mdCallMalloc, mdCallFree, mdSetAllocator - control memory allocation for the MIDI library
• mdGetDefault(3dm) mdGetDefault - return the name of the default input or output interface
• mdGetName(3dm) mdGetName - return a MIDI interface name
• mdGetStatus(3dm) mdGetStatus, mdGetChannel, mdGetByte1, mdGetByte2, mdSetStatus, mdSetChannel, mdSetByte1, mdSetByte2 - manipulate MIDI messages
• mdInit(3dm) mdInit, mdRegister, mdUnRegister - initialize MIDI system and register new interfaces
• mdIntro(3dm) midi, mdIntro - Introduction to the Silicon Graphics MIDI Library (libmd)
• mdPanic(3dm) mdPanic - flush MIDI output and transmit (obsolete)
• mdPause(3dm) mdPause- discard any queued messages and return stamp of last event
• mdPrintEvent(3dm) mdPrintEvent - Generate a descriptive string for MIDI events
• mdReceive(3dm) mdReceive - Accept MIDI events from a port
• mdSend(3dm) mdSend - send out MIDI data
• mdSetOrigin(3dm) mdSetOrigin mdGetOrigin - control origin time for synchronization
• mdSetStampMode(3dm) mdGetStampMode, mdSetStampMode - control time stamping for an MDport
• mdSetStartPoint(3dm) mdSetStartPoint - Define initial MIDI-stamp and UST time values
• mdSetTempo(3dm) mdSetDivision, mdSetTempo, mdSetTempoScale, mdGetDivision, mdGetTempo, mdTickstoNanos, mdNanosToTicks - set tempo and division for a port
• mdSetTemporalBuffering(3dm) mdSetTemporalBuffering, mdGetTemporalBuffering - obsolete routines for controlling temporal buffering
• mdTell(3dm) mdTell, mdTellNow - Return the MIDI port-specific timing information
• mvAddTrack(3dm) mvAddTrack, mvRemoveTrack - add or remove tracks in a movie
• mvBindWindow(3dm) mvBindOpenGLWindow, mvUnbindOpenGLWindow - functions to associate movies with and dissociate movies from playback windows
• mvClose(3dm) mvWrite, mvClose, mvDestroyMovie, - write, close, and destroy movie instances
• mvConvertTime(3dm) mvConvertTime - Convert times from one timescale to another.
• mvCreate(3dm) mvCreateFile, mvCreateFD, mvCreateMem - create new movie instances
• mvCurrentTime(3dm) mvSetCurrentTime, mvGetCurrentTime - Set/get the time which is currently playing
• mvDeleteFramesAtTime(3dm) mvInsertTrackGapAtTime mvDeleteFramesAtTime, mvCopyFramesAtTime - edit/manipulate a movie track
• mvEditByFrame(3dm) mvEditByFrame: mvReadFrames, mvInsertFrames, mvAppendFrames, mvDeleteFrames, mvPasteFrames - edit/manipulate a movie track
• mvEnableAudio(3dm) mvSetEnableAudio, mvGetEnableAudio - Enable/disable audio playback for a movie instance
• mvEnableVideo(3dm) mvSetEnableVideo, mvGetEnableVideo - Enable/disable video playback for a movie instance
• mvEvent(3dm) mvGetEventFD, mvSetSelectEvents, mvGetSelectEvents, mvNextEvent, mvPeekEvent, mvPendingEvents, mvGetMovieEventFD, mvSetMovieSelectEvents, mvGetMovieSelectEvents, mvNextMovieEvent, mvPeekMovieEvent, mvPendingMovieEvents mvGetPlayErrorStr - Movie Playback Library event handling functions
• mvExportFlattenedFile(3dm) mvExportFlattenedFile - export a movie to a given file format
• mvFindTrack(3dm) mvFindTrackByIndex, mvFindTrackByMedium - find tracks in a movie
• mvGetActualFrameRate(3dm) mvGetActualFrameRate - Obtain playback frame rate information for a movie
• mvGetAudioWidth(3dm) mvGetAudioWidth, mvGetAudioRate, mvGetAudioChannels, mvGetAudioFormat, mvGetAudioCompression, - get and set the parameters of a an audio track
• mvGetBitrate(3dm) mvGetBitrate - get the stored bitrate of a movie file or track
• mvGetBoundary(3dm) mvGetBoundary: mvGetMovieBoundary, mvGetTrackBoundary - get timing information about movie or track
• mvGetErrno(3dm) mvGetErrno, mvClearErrno, mvGetErrorStr - return information for Movie Library error codes
• mvGetFileFormat(3dm) mvGetFileFormat, mvGetLoopMode, mvGetLoopLimit, mvGetTitle, mvGetComment, mvGetOptimized, mvSetLoopMode, mvSetLoopLimit, mvSetTitle, mvSetComment - get and set the properties of a movie
• mvGetImageWidth(3dm) mvGetImageWidth, mvGetImageHeight, mvGetImageRate, mvGetImageCompression, mvGetImageInterlacing, mvGetImagePacking, mvGetImageOrientation, mvGetSpatialQuality, mvGetTemporalQuality, mvSetImageRate - get and set the properties of a an image track
• mvGetMovieGLContextState(3dm) mvGetMovieGLContextState, mvSetMovieGLContextState - set/get the GLContextState of a movie
• mvGetMoviePlayVolume(3dm) mvGetMoviePlayVolume, mvGetTrackPlayVolume, mvSetMoviePlayVolume, mvSetTrackPlayVolume - get and set the volume of a movie or track
• mvGetMoviePreviewTime(3dm) mvGetMovieCurrentTime, mvGetMovieGalleryTime, mvGetMoviePreviewTime, mvGetMovieSelectionTime, mvSetMovieCurrentTime, mvSetMovieGalleryTime, mvSetMoviePreviewTime mvSetMovieSelectionTime - get and set movie times for special purposes
• mvGetNumTracks(3dm) mvGetNumTracks - determine number of tracks in a movie instance
• mvGetTrackDataFieldInfo(3dm) mvGetTrackDataFieldInfo, mvSetTrackDataFieldInfo, mvTrackDataHasFieldInfo - get track data info
• mvGetTrackDuration(3dm) mvGetTrackDuration, mvGetTrackOffset, mvGetMovieDuration, mvGetEstMovieDuration, mvSetTrackOffset - get and set movie/track offset and duration.
• mvGetTrackEnable(3dm) mvGetTrackEnable, mvSetTrackEnable - Enable/Disable a track
• mvGetTrackLayer(3dm) mvGetTrackLayer, mvSetTrackLayer - set/get the layer of a track
• mvGetTrackLength(3dm) mvGetTrackLength, mvGetScannedLength, mvGetTrackMedium, mvGetTrackId, mvGetTrackMovie, mvGetTrackDisplayWidth, mvSetTrackDisplayWidth, mvGetTrackDisplayHeight, mvSetTrackDisplayHeight, mvSetTrackSMPTEStart, mvGetTrackSMPTEStart - get and set the properties of a track
• mvGetTrackMaxDataSize(3dm) mvGetTrackMaxDataSize, mvGetTrackMaxFieldSize - convenience function to get the max data size of a track
• mvGetTrackTimeScale(3dm) mvGetMovieTimeScale, mvSetMovieTimeScale, mvGetTrackTimeScale, mvSetTrackTimeScale - get and set a movie or track timescale.
• mvGetTrackUserDataListHandle(3dm) mvGetTrackUserDataListHandle, mvGetMovieUserDataListHandle - get user data dmParams of the track/movie
• mvGrabRelease(3dm) mvGrabOpenGL, mvReleaseOpenGL - provide safe usage of graphics libraries from Movie Playback Library clients
• mvHwAccel(3dm) mvGetMovieHwAcceleration, mvSetMovieHwAcceleration - Set/get movie hardware acceleration
• mvInsertFramesAtTime(3dm) mvInsertFramesAtTime: - edit/manipulate a movie track
• mvIntro(3dm) mvIntro - introduction to the Movie Libraries
• mvIs(3dm) mvIsMovieFile, mvIsMovieFD, mvIsMovieMem - identify movie instances
• mvIsAppendOnly(3dm) mvIsAppendOnly - see if a movie instance is append-only
• mvIsReadOnly(3dm) mvIsReadOnly - see if a movie instance is read-only
• mvMapBetweenTracks(3dm) mvMapBetweenTracks - convert frame numbers between tracks
• mvMatrix(3dm) mvMatrix: mvSetMovieMatrix2dIdentity, mvSetMovieMatrix2d, mvGetMovieMatrix2d, mvSetTrackMatrix2dIdentity, mvSetTrackMatrix2d, mvGetTrackMatrix2d - Matrix manipulation of movie and track
• mvMovieEdit(3dm) mvMovieEdit: mvInsertMovieGapAtTime, mvDeleteMovieAtTime, mvCopyMovieAtTime, mvScaleMovieAtTime - edit movie/tracks
• mvMovieRect(3dm) mvMovieRect: mvSetMovieRect, mvGetMovieRect, mvGetMovieBoundsRect, mvGetMovieBoundingRect - Set/get movie rectangle
• mvNumMoviesHint(3dm) mvSetNumMoviesHint, mvGetNumMoviesHint - Advise Movie Playback Library of number of simultaneously-playing movies
• mvOpen(3dm) mvOpenFile, mvOpenFD, mvOpenMem - open movie instances
• mvOptimize(3dm) mvOptimize - optimize a movie file for playback after editing operations, or create a flattened movie file
• mvp(3dm) mvp - Multiport Video Processor for the O2 system
• mvParams(3dm) mvGetParams, mvSetParams, mvAddUserParam, mvSetMovieDefaults - get and set the parameters of a movie or track
• mvPlay(3dm) mvPlay, mvStop, mvIsMovieStopped - Start and stop movie playback
• mvPlayEveryFrame(3dm) mvSetPlayEveryFrame, mvGetPlayEveryFrame - Make movies play against time base, or without dropping frames
• mvPlayLoop(3dm) mvSetPlayLoopMode, mvGetPlayLoopMode, mvSetPlayLoopLimit, mvGetPlayLoopLimit, mvSetPlayLoopCount, mvGetPlayLoopCount - Set/get movie playback loop mode, limit, and count.
• mvPlaySpeed(3dm) mvSetPlaySpeed, mvGetPlaySpeed, mvGetCurrentDirection - Control rate of playback for a movie instance
• mvPort(3dm) mvOpenPort, mvClosePort, mvBindMovieToPorts, mvUnbindMovieFromPorts, mvUnbindPortsFromMovie, mvGetMoviePorts, mvGetPortMovie, mvGetMovieMasterPort, mvGrabPort, mvReleasePort - Functions to handle generic playback ports
• mvPrimaryAudio(3dm) mvSetPrimaryAudio, mvGetPrimaryAudio - Set/get the movie instance with control over the audio hardware
• mvQuery(3dm) mvQueryInt, mvQueryDouble, mvQueryPointer - query information about file formats
• mvReadCompressedImage(3dm) mvReadCompressedImage, mvGetCompressedImageSize, mvInsertCompressedImage - read and write compressed images in a movie
• mvReadTrackData(3dm) mvReadTrackData, mvInsertTrackData, mvInsertTrackDataAtOffset, - manipulate data in track
• mvReadTrackDataFields(3dm) mvReadTrackDataFields, mvInsertTrackDataFields - read and insert field based data
• mvRenderAudio(3dm) mvRenderMovieToAudioBuffer, mvGetAudioBufferSize - Multi-track, time- based access of audio data from movies.
• mvRenderToOpenGL(3dm) mvRenderMovieToOpenGL, mvRenderMovieToImageBuffer, mvRenderTrackToOpenGL - display of visual data from movies and tracks
• mvResizeWindow(3dm) mvResizeOpenGLWindow - Notify Movie Playback Library of window size changes
• mvSetImageDefaults(3dm) mvSetImageDefaults mvSetAudioDefaults - set default parameters for tracks
• mvShowCurrentFrame(3dm) mvShowCurrentTime, mvShowCurrentFrame - Display current movie frame on screen for a movie instance
• mvStartEndFrame(3dm) mvSetStartFrame, mvGetStartFrame, mvSetEndFrame, mvGetEndFrame, mvSetStartTime, mvGetStartTime, mvSetEndTime, mvGetEndTime, - Set/get the frame or time at which movie playback should start/end
• mvSync(3dm) mvPlayAt, mvGetMovieSyncInfo, mvSetMovieSyncInfo - Intra-application synchronization support
• mvTrackData(3dm) mvTrackData: mvGetTrackNumDataIndex mvGetTrackDataInfo mvGetTrackDataOffset mvGetTrackDataIndexAtTime - retrieve information about track data
• mvTrackDataParams(3dm) mvTrackDataParams: mvGetTrackNumDataParams, mvAddTrackDataParams, mvSetTrackDataParams, mvGetTrackDataParams - manipulate data in track
• mvVideoDisplay(3dm) mvSetVideoDisplay, mvGetVideoDisplay - Set/get movie video display mode.
• mvVideoStillFrame(3dm) mvSetVideoStillFrame, mvGetVideoStillFrame - Set/get movie video output still frame
• mvView(3dm) mvSetViewOffset, mvGetViewOffset, mvQueryViewOffset, mvSetViewSize, mvGetViewSize, mvQueryViewSize, mvSetViewOffsetAndSize, mvGetViewKeepAspect - Change the location and size of the region for movie display inside a GL window
• mvViewBackground(3dm) mvSetViewBackground, mvGetViewBackground - Set background color of playback region for a movie instance
• videolibrary(3dm) VLintro, libvl, vl - IRIS Video Library for SGI workstations
• videosync(3dm) videosync - information about USTs and video timing on SGI systems
• vlbufferreset(3dm) vlBufferReset, vlBufferDone, vlBufferGetFd, vlBufferAdvise, vlNodeGetFd, vlDMBufferResetNode - VL buffer state management routines
• vlcallbacks(3dm) vlRegisterHandler, vlRemoveHandler, vlAddCallback, vlRemoveCallback, vlRemoveAllCallbacks, vlCallCallbacks, vlMainLoop - IRIS VL event handling routines
• vlcreatebuffer(3dm) vlCreateBuffer, vlDestroyBuffer - IRIS VL buffer create and destroy routines
• vlcreatepath(3dm) vlCreatePath, vlDestroyPath - manage VL paths
• vlDMBufferGetValid(3dm) vlDMBufferGetValid, vlDMBufferPutValid, vlDMBufferGetVideoInfo, vlDMBufferSetVideoInfo - VL DMbuffer management routines
• vldmbuffersend(3dm) vlDMBufferSend - send a DMbuffer to video out.
• vlDMGetParams(3dm) vlDMGetParams - get DMparams list for video subsystem
• vldmpoolregister(3dm) vlDMPoolGetParams, vlDMPoolRegister, vlDMPoolDeregister - set up a DMbufferpool for video transfer
• vleventrecv(3dm) vlPathGetFD, vlEventRecv, vlEventToDMBuffer - event handling routines
• vlgetconnection(3dm) vlGetConnection - manage the connectivity of a VL path
• vlgetconnectioninfo(3dm) vlGetConnectionInfo - get information about a video connection
• vlgetcontrol(3dm) vlGetControl, vlSetControl - get or set control VL value
• vlgetcontrolinfo(3dm) vlGetControlInfo, vlFreeControlInfo - get and free information about VL controls
• vlgetcontrollist(3dm) vlGetControlList, vlFreeControlList - get and free the list of valid VL controls for a path
• vlgetdevice(3dm) vlGetDevice, vlGetDeviceList - get VL device information
• vlGetFilled(3dm) vlGetFilled, vlGetFilledByNode, vlDMBufferGetFilledByNode - get the number of valid entries in a VLBuffer or given path.
• vlGetFrontierMSC(3dm) vlGetFrontierMSC - get the frontier MSC associated with a particular VL_MEM node
• vlgetnextvalid(3dm) vlGetNextValid, vlGetLatestValid, vlGetActiveRegion, vlGetNextFree, vlGetDMediaInfo, vlGetImageInfo, vlPutValid, vlPutFree - VL buffer management routines
• vlgetnode(3dm) vlGetNode, vlAddNode, vlRemoveNode - VL node handling routines
• vlGetPathDelay(3dm) vlGetPathDelay - get the time delay between two jacks in a VLPath
• vlgetstring(3dm) vlGetString - returns a string describing the current VL connection.
• vlGetUSTMSCPair(3dm) vlGetUSTMSCPair - get the time at which a field/frame came in or will go out
• vlGetUSTPerMSC(3dm) vlGetUSTPerMSC - get the time spacing of fields/frames in a path
• vlisstreamused(3dm) vlIsStreamUsed - determine if VL stream is used
• vlmatchfloat(3dm) vlMatchFloat, vlMatchFraction, vlFractionCount, vlMatchFractionInList, vlFractionList - VL fraction list utility functions
• vlNextEvent(3dm) vlNextEvent, vlCheckEvent, vlPeekEvent, vlEventToName, vlPending - VL event handling routines
• vlopenvideo(3dm) vlOpenVideo, vlCloseVideo - open or close a connection to the VL server
• vlperror(3dm) vlPerror, vlStrError, vlGetErrno, vlErrno - VL error routines
• vlregisterbuffer(3dm) vlRegisterBuffer, vlDeregisterBuffer - set up a VL buffer for transfer
• vlsavesystemdefaults(3dm) vlSaveSystemDefaults, vlRestoreSystemDefaults, vlRestoreFactoryDefaults - manage default video settings
• vlselectevents(3dm) vlSelectEvents - select VL events of interest
• vlserverinfo(3dm) vlConnectionNumber, vlGetFD, vlServerProtocolVersion, vlServerVendorRelease, vlServerString - extract information from an open video server handle
• vlsetconnection(3dm) vlSetConnection - manage the connectivity of a VL path
• vlsetcontroltrigger(3dm) vlSetControlTrigger, vlSetControlInLine - frame-accurate setting of control VL values
• vlseterrorhandler(3dm) vlSetErrorHandler, vlSetIOErrorHandler - set VL non-fatal or fatal error handler
• vlsetuppaths(3dm) vlSetupPaths - setup VL paths
• vltransfer(3dm) vlBeginTransfer, vlEndTransfer, vlGetTransferSize - begin and end transfer on video path
• vlxeventrecv(3dm) VL_EXT_EVENT_RECV - VL Event Receive library extension for O2 workstations (now obsolete)