Section 3N, IRIX 6.5.15

116 pages.

• accept(3N) accept - accept a connection on a socket
• bind(3N) bind - bind a name to a socket
• byteorder(3N) htonl, htons, ntohl, ntohs - convert values between host and network byte order
• cap_bind(3N) cap_bind - bind a privileged name to a socket
• cap_network_ioctl(3N) cap_network_ioctl - execute an I/O control operation with privilege
• cap_schedctl(3N) cap_schedctl - alter scheduling parameters
• cap_socket(3N) cap_socket - create a socket with privilege
• connect(3N) connect - initiate a connection on a socket
• doconfig(3N) doconfig - execute a configuration script
• gethostbyname(3N) gethostbyname, gethostbyname_r, gethostbyaddr, gethostbyaddr_r, gethostent, gethostent_r, fgethostent, fgethostent_r, sethostent, endhostent, herror, hstrerror - get network host entry
• getnetconfig(3N) getnetconfig - get network configuration database entry
• getnetent(3N) getnetent, getnetent_r, fgetnetent, fgetnetent_r, getnetbyaddr, getnetbyaddr_r, getnetbyname, getnetbyname_r, setnetent, endnetent - get network entry
• getnetpath(3N) getnetpath - get netconfig entry corresponding to NETPATH component
• getpeername(3N) getpeername - get name of connected peer
• getprotoent(3N) getprotoent, getprotobynumber, getprotobyname, getprotoent_r, getprotobynumber_r, getprotobyname_r, fgetprotoent, fgetprotoent_r, setprotoent, endprotoent - get protocol entry
• getservent(3N) getservent, getservent_r, fgetservent, fgetservent_r, getservbyport, getservbyport_r, getservbyname, getservbyname_r, setservent, endservent - get service entry
• getsockname(3N) getsockname - get socket name
• getsockopt(3N) getsockopt, setsockopt - get and set options on sockets
• inet(3N) [p_man/cat3c] inet_aton, inet_addr, inet_network, inet_isaddr, inet_ntoa, inet_makeaddr, inet_lnaof, inet_netof - Internet address manipulation routines
• inet(3N) [p_man/cat3n] inet: inet_addr, inet_network, inet_makeaddr, inet_lnaof, inet_netof, inet_ntoa - Internet address manipulation
• intro(3N) intro - introduction to SVR4 networking functions and libraries
• libt6(3N) libt6 - TSIX trusted IPC library (part of libc in Trusted IRIX)
• listen(3N) listen - listen for connections on a socket
• netdir(3N) netdir_getbyname, netdir_getbyaddr, netdir_free, netdir_mergeaddr, taddr2uaddr, uaddr2taddr, netdir_perror, netdir_sperror - generic transport name-to-address translation
• publickey(3N) publickey: getpublickey, getsecretkey - retrieve public or secret key
• rcmd(3N) rcmd, rresvport, ruserok - routines for returning a stream to a remote command
• recv(3N) recv, recvfrom, recvmsg - receive a message from a socket
• registerinethost(3N) registerinethost - allocate internet address for workstation
• renamehost(3N) renamehost - rename the existing hostname in NIS hosts database
• resolver(3N) res_query, res_search, res_mkquery, res_send, res_init, dn_comp, dn_expand - resolver routines
• rexec(3N) rexec - return stream to a remote command
• rpc(3N) rpc - library routines for remote procedure calls
• rpc_clnt_au(3N) rpc_clnt_auth: auth_destroy, authnone_create, authsys_create, authsys_create_default - library routines for client side remote procedure call authentication
• rpc_clnt_cl(3N) rpc_clnt_calls: clnt_call, clnt_freeres, clnt_geterr, clnt_perrno, clnt_perror, clnt_sperrno, clnt_sperror, rpc_broadcast, rpc_call - library routines for client side calls
• rpc_clnt_cr(3N) rpc_clnt_create: clnt_control, clnt_create, clnt_destroy, clnt_dg_create, clnt_pcreateerror, clnt_raw_create, clnt_spcreateerror, clnt_tli_create, clnt_tp_create, clnt_vc_create - library routines for dealing with creation and manipulation of CLIENT handles
• rpc_svc_cls(3N) rpc_svc_calls: rpc_reg, svc_reg, svc_unreg, xprt_register, xprt_unregister - library routines for registering servers
• rpc_svc_cr(3N) rpc_svc_create: svc_create, svc_destroy, svc_dg_create, svc_fd_create, svc_raw_create, svc_tli_create, svc_tp_create, svc_vc_create - library routines for dealing with the creation of server handles
• rpc_svc_err(3N) rpc_svc_err: svcerr_auth, svcerr_decode, svcerr_noproc, svcerr_noprog, svcerr_progvers, svcerr_systemerr, svcerr_weakauth - library routines for server side remote procedure call errors
• rpc_svc_reg(3N) rpc_svc_reg: svc_freeargs, svc_getargs, svc_getreqset, svc_getrpccaller, svc_run, svc_sendreply - library routines for RPC servers
• rpc_xdr(3N) rpc_xdr: xdr_accepted_reply, xdr_authsys_parms, xdr_callhdr, xdr_callmsg, xdr_opaque_auth, xdr_rejected_reply, xdr_replymsg - XDR library routines for remote procedure calls
• rpcbind(3N) rpcbind: rpcb_getmaps, rpcb_getaddr, rpcb_gettime, rpcb_rmtcall, rpcb_set, rpcb_unset - library routines for RPC bind service
• secure_rpc(3N) secure_rpc: authdes_seccreate, authdes_getucred, getnetname, host2netname, key_decryptsession, key_encryptsession, key_gendes, key_setsecret, netname2host, netname2user, user2netname - library routines for secure remote procedure calls
• send(3N) send, sendto, sendmsg - send a message from a socket
• sethostresorder(3N) sethostresorder - specify order of host-address resolution services
• shutdown(3N) shutdown - shut down part of a full-duplex connection
• socket(3N) socket - create an endpoint for communication
• socketpair(3N) socketpair - create a pair of connected sockets
• spray(3N) spray - scatter data in order to check the network
• t6alloc_blk(3N) t6alloc_blk - Allocate a control block
• t6attr_alloc(3N) t6attr_alloc - Allocate a control block with all attributes set
• t6clear_blk(3N) t6clear_blk - Clear a control block
• t6cmp_attrs(3N) t6cmp_attrs - Compare two security attributes
• t6cmp_blk(3N) t6cmp_blk - compare security attributes
• t6copy_attr(3N) t6copy_attr - copy security attributes
• t6copy_blk(3N) t6copy_blk - copy security attributes
• t6create_attr(3N) t6create_attr - Create a control block
• t6dup_attr(3N) t6dup_attr - duplicate security attributes
• t6dup_blk(3N) t6dup_blk - Duplicate security attributes
• t6ext_attr(3N) t6ext_attr, t6new_attr - Activate extended security attributes or set policy on security attribute change
• t6free_attr(3N) t6free_attr - Deallocate a control block
• t6free_blk(3N) t6free_blk - Deallocate a control block
• t6get_attr(3N) t6get_attr, t6set_attr - Get or set security attributes
• t6get_endpt_mask(3N) t6get_endpt_mask, t6set_endpt_mask, t6get_endpt_default, t6set_endpt_default - get or set endpoint security attribute mask, get or set endpoint default security attributes
• t6mls_socket(3N) t6mls_socket - Mark a socket as trusted.
• t6peek_attr(3N) t6peek_attr, t6last_attr - examine the security attributes on the next or previous byte of data
• t6recvfrom(3N) t6recvfrom - Read security attributes and data from a trusted endpoint
• t6rhdb_flush(3N) t6rhdb_flush - TSIX Remote Host DataBase flush
• t6rhdb_get_host(3N) t6rhdb_get_host - TSIX Remote Host DataBase get host information
• t6rhdb_put_host(3N) t6rhdb_put_host - TSIX Remote Host DataBase get host information
• t6rhdb_stat(3N) t6rhdb_stat - TSIX Remote Host DataBase statistics
• t6sendto(3N) t6sendto - Specify security attributes to send with data on a trusted endpoint
• t6size_attr(3N) t6size_attr - Get the size of a particular attribute from the control structure.
• t_accept(3N) t_accept - accept a connect request
• t_alloc(3N) t_alloc - allocate a library structure
• t_bind(3N) t_bind - bind an address to a transport endpoint
• t_close(3N) t_close - close a transport endpoint
• t_connect(3N) t_connect - establish a connection with another transport user
• t_error(3N) t_error - produce error message
• t_free(3N) t_free - free a library structure
• t_getinfo(3N) t_getinfo - get protocol-specific service information
• t_getprotaddr(3N) t_getprotaddr - get protocol-specific service information
• t_getstate(3N) t_getstate - get the current state
• t_listen(3N) t_listen - listen for a connect request
• t_look(3N) t_look - look at the current event on a transport endpoint
• t_open(3N) t_open - establish a transport endpoint
• t_optmgmt(3N) t_optmgmt - manage options for a transport endpoint
• t_rcv(3N) t_rcv - receive data or expedited data sent over a connection
• t_rcvconnect(3N) t_rcvconnect - receive the confirmation from a connect request
• t_rcvdis(3N) t_rcvdis - retrieve information from disconnect
• t_rcvrel(3N) t_rcvrel - acknowledge receipt of an orderly release indication
• t_rcvudata(3N) t_rcvudata - receive a data unit
• t_rcvuderr(3N) t_rcvuderr - receive a unit data error indication
• t_snd(3N) t_snd - send data or expedited data over a connection
• t_snddis(3N) t_snddis - send user-initiated disconnect request
• t_sndrel(3N) t_sndrel - initiate an orderly release
• t_sndudata(3N) t_sndudata - send a data unit
• t_strerror(3N) t_strerror - produce an error message string
• t_sync(3N) t_sync - synchronize transport library
• t_unbind(3N) t_unbind - disable a transport endpoint
• tsix_get_mac(3N) tsix_get_mac - get the MAC label of incoming data
• tsix_get_solabel(3N) tsix_get_solabel - get the MAC label of a socket
• tsix_get_uid(3N) tsix_get_uid - get the User ID of incoming data
• tsix_off(3N) tsix_off - disable trusted networking
• tsix_on(3N) tsix_on - enable trusted networking
• tsix_recvfrom_mac(3N) tsix_recvfrom_mac - receive a message and a MAC label from a socket
• tsix_sendto_mac(3N) tsix_sendto_mac - send a message with a specified MAC label
• tsix_set_mac(3N) tsix_set_mac - set the MAC label of outgoing data
• tsix_set_mac_byrhost(3N) tsix_set_mac_byrhost - set the MAC label of outgoing data
• tsix_set_solabel(3N) tsix_set_solabel - set the MAC label of a socket
• tsix_set_uid(3N) tsix_set_uid - set the User ID of outgoing data
• unregisterhost(3N) unregisterhost - remove the existing host entry in NIS hosts database
• xdr(3N) xdr - library routines for external data representation
• xdr_admin(3N) xdr_admin: xdr_getpos, xdr_inline, xdrrec_eof, xdr_setpos - library routines for external data representation
• xdr_complex(3N) xdr_complex: xdr_array, xdr_bytes, xdr_opaque, xdr_pointer, xdr_reference, xdr_string, xdr_union, xdr_vector, xdr_wrapstring - library routines for external data representation
• xdr_create(3N) xdr_create: xdr_destroy, xdrmem_create, xdrrec_create, xdrstdio_create - library routines for external data representation stream creation
• xdr_simple(3N) xdr_simple: xdr_bool, xdr_char, xdr_double, xdr_enum, xdr_float, xdr_free, xdr_int, xdr_long, xdr_longlong_t, xdr_short, xdr_u_char, xdr_u_int, xdr_u_long, xdr_u_longlong_t, xdr_u_short, xdr_void - library routines for external data representation