krb5.conf(5)
krb5.conf - Kerberos configuration file
Showing IRIX 6.5.30 (default release). Added in IRIX 6.5.22.
NAME krb5.conf - Kerberos configuration file DESCRIPTION krb5.conf contains configuration information needed by the Kerberos V5 library. This includes information describing the default Kerberos realm, and the location of the Kerberos key distribution centers for known realms. The krb5.conf file uses an INI-style format. Sections are delimited by square braces; within each section, there are relations where tags can be assigned to have specific values. Tags can also contain a subsection, which contains further relations or subsections. A tag can be assigned to multiple values. Here is an example of the INI-style format used by krb5.conf: [section1] tag1 = value_a tag1 = value_b tag2 = value_c [section 2] tag3 = { subtag1 = subtag_value_a subtag1 = subtag_value_b subtag2 = subtag_value_c } tag4 = { subtag1 = subtag_value_d subtag2 = subtag_value_e } The following sections are currently used in the krb5.conf file: [libdefaults] Contains various default values used by the Kerberos V5 library. [login] Contains default values used by the Kerberos V5 login program, login.krb5(8). [appdefaults] Contains default values that can be used by Kerberos V5 applications. [realms] Contains subsections keyed by Kerberos realm names which describe where to find the Kerberos servers for a particular realm, and other realm-specific information. [domain_realm] Contains relations which map subdomains and domain names to Kerberos realm names. This is used by programs to determine what realm a host should be in, given its fully qualified domain name. [logging] Contains relations which determine how Kerberos entities are to perform their logging. [capaths] Contains the authentication paths used with non- hierarchical cross-realm. Entries in the section are used by the client to determine the intermediate realms which may be used in cross-realm authentication. It is also used by the end-service when checking the transited field for trusted intermediate realms. Each of these sections will be covered in more details in the following sections. LIBDEFAULTS SECTION The following relations are defined in the [libdefaults] section: default_keytab_name This relation specifies the default keytab name to be used by application severs such as telnetd and rlogind. The default is "/etc/krb5.keytab". This formerly defaulted to "/etc/v5srvtab", but was changed to the current value. default_realm This relation identifies the default realm to be used in a client host's Kerberos activity. default_tgs_enctypes This relation identifies the supported list of session key encryption types that should be returned by the KDC. The list may be delimited with commas or whitespace. default_tkt_enctypes This relation identifies the supported list of session key encryption types that should be requested by the client, in the same format. permitted_enctypes This relation identifies the permitted list of session key encryption types. clockskew This relation sets the maximum allowable amount of clockskew in seconds that the library will tolerate before assuming that a Kerberos message is invalid. The default value is 300 seconds, or five minutes. kdc_timesync If the value of this relation is non-zero (the default), the library will compute the difference between the system clock and the time returned by the KDC and in order to correct for an inaccurate system clock. This corrective factor is only used by the Kerberos library. kdc_req_checksum_type For compatability with DCE security servers which do not support the default CKSUMTYPE_RSA_MD5 used by this version of Kerberos. Use a value of 2 to use the CKSUMTYPE_RSA_MD4 instead. This applies to DCE 1.1 and earlier. ap_req_checksum_type This allows you to set the checksum type used in the authenticator of KRB_AP_REQ messages. The default value for this type is CKSUMTYPE_RSA_MD5. For compatibility with applications linked against DCE version 1.1 or earlier Kerberos libraries, use a value of 2 to use the CKSUMTYPE_RSA_MD4 instead. safe_checksum_type This allows you to set the preferred keyed-checksum type for use in KRB_SAFE messages. The default value for this type is CKSUMTYPE_RSA_MD5_DES. For compatibility with applications linked against DCE version 1.1 or earlier Kerberos libraries, use a value of 3 to use the CKSUMTYPE_RSA_MD4_DES instead. This field is ignored when its value is incompatible with the session key type. ccache_type User this parameter on systems which are DCE clients, to specify the type of cache to be created by kinit, or when forwarded tickets are received. DCE and Kerberos can share the cache, but some versions of DCE do not support the default cache as created by this version of Kerberos. Use a value of 1 on DCE 1.0.3a systems, and a value of 2 on DCE 1.1 systems. krb4_srvtab Specifies the location of the Kerberos V4 srvtab file. Default is "/etc/srvtab". krb4_config Specifies the location of hte Kerberos V4 configuration file. Default is "/etc/krb.conf". krb4_realms Specifies the location of the Kerberos V4 domain/realm translation file. Default is "/etc/krb.realms". dns_lookup_kdc Indicate whether DNS SRV records shoud be used to locate the KDCs and other servers for a realm, if they are not listed in the information for the realm. The default is to use these records. dns_lookup_realm Indicate whether DNS TXT records should be used to determine the Kerberos realm of a host. The default is not to use these records. dns_fallback General flag controlling the use of DNS for Kerberos information. If both of the preceding options are specified, this option has no effect. extra_addresses This allows a computer to use multiple local addresses, in order to allow Kerberos to work in a network that uses NATs. The addresses should be in a comma- separated list. udp_preference_limit When sending a message to the KDC, the library will try using TCP before UDP if the size of the message is above "udp_preference_list". If the message is smaller than "udp_preference_list", then UDP will be tried before TCP. Regardless of the size, both protocols will be tried if the first attempt fails. verify_ap_req_nofail If this flag is set, then an attempt to get initial credentials will fail if the client machine does not have a keytab. The default for the flag is false. renew_lifetime The value of this tag is the default renewable lifetime for initial tickets. The default value for the tag is 0. noaddresses Setting this flag causes the initial Kerberos ticket to be addressless. The default for the flag is true. forwardable If this flag is set, initial tickets by default will be forwardable. The default value for this flag is false. proxiable If this flag is set, initial tickets by default will be proxiable. The default value for this flag is false. APPDEFAULTS SECTION Each tag in the [appdefaults] section names a Kerberos V5 application or an option that is used by some Kerberos V5 application[s]. The four ways that you can set values for options are as follows, in decreasing order of precedence: #1) application = { realm1 = { option = value } realm2 = { option = value } } #2) application = { option1 = value option2 = value } #3) realm = { option = value } #4) option = value LOGIN SECTION The [login] section is used to configure the behavior of the Kerberos V5 login program, login.krb5(8). Refer to the manual entry for login.krb5 for a description of the relations allowed in this section. REALMS SECTION Each tag in the [realms] section of the file names a Kerberos realm. The value of the tag is a subsection where the relations in that subsection define the properties of that particular realm. For example: [realms] ATHENA.MIT.EDU = { admin_server = KERBEROS.MIT.EDU default_domain = MIT.EDU v4_instance_convert = { mit = mit.edu lithium = lithium.lcs.mit.edu } v4_realm = LCS.MIT.EDU } For each realm, the following tags may be specified in the realm's subsection: kdc The value of this relation is the name of a host running a KDC for that realm. An optional port number (preceded by a colon) may be appended to the hostname. This tag should generally be used only if the realm administrator has not made the information available through DNS. admin_server This relation identifies the host where the administration server is running. Typically this is the Master Kerberos server. default_domain This relation identifies the default domain for which hosts in this realm are assumed to be in. This is needed for translating V4 principal names (which do not contain a domain name) to V5 principal names (which do). v4_instance_convert This subsection allows the administrator to configure exceptions to the default_domain mapping rule. It contains V4 instances (the tag name) which should be translated to some specific hostname (the tag value) as the second component in a Kerberos V5 principal name. v4_realm This relation is used by the krb524 library routines when converting a V5 principal name to a V4 principal name. It is used when V4 realm name and the V5 realm are not the same, but still share the same principal names and passwords. The tag value is the Kerberos V4 realm name. auth_to_local_names This subsection allows you to set explicit mappings from principal names to local user names. The tag is the mapping name, and the value is the corresponding local user name. auth_to_local This tag allows you to set a general rule for mapping principal names to local user names. It will be used if there is not an explicit mapping for the principal name that is being translated. The possible values are: DB:<filename> The principal will be looked up in the database <filename>. Support for this is not currently compiled in by default. RULE:<exp> The local name will be formulated from <exp>. DEFAULT The principal name will be used as the local name. If the principal has more than one component or is not in the default realm, this rule is not applicable and the conversion will fail. DOMAIN_REALM SECTION The [domain_realm] section provides a translation from a hostname to the Kerberos realm name for the services provided by that host. The tag name can be a hostname, or a domain name, where domain names are indicated by a prefix of a period ('.') character. The value of the relation is the Kerberos realm name for that particular host or domain. Host names and domain names should be in lower case. If no translation entry applies, the host's realm is considered to be the hostname's domain portion converted to upper case. For example, the following [domain_realm] section: [domain_realm] .mit.edu = ATHENA.MIT.EDU mit.edu = ATHENA.MIT.EDU dodo.mit.edu = SMS_TEST.MIT.EDU .ucsc.edu = CATS.UCSC.EDU maps dodo.mit.edu into the SMS_TEST.MIT.EDU realm, all other hosts in the MIT.EDU domain to the ATHENA.MIT.EDU realm, and all hosts in the UCSC.EDU domain into the CATS.UCSC.EDU realm. ucbvax.berkeley.edu would be mapped by the default rules to the BERKELEY.EDU realm, while sage.lcs.mit.edu would be mapped to the LCS.MIT.EDU realm. LOGGING SECTION The [logging] section indicates how a particular entity is to perform its logging. The relations specified in this section assign one or more values to the entity name. Currently, the following entities are used: kdc These entries specify how the KDC is to perform its logging. admin_server These entries specify how the administrative server is to perform its logging. default These entries specify how to perform logging in the absence of explicit specifications otherwise. Values are of the following forms: FILE=<filename> FILE:<filename> This value causes the entity's logging messages to go to the specified file. If the = form is used, then the file is overwritten. Otherwise, the file is appended to. STDERR This value causes the entity's logging messages to go to its standard error stream. CONSOLE This value causes the entity's logging messages to go to the console, if the system supports it. DEVICE=<devicename> This causes the entity's logging messages to go to the specified device. SYSLOG[:<severity>[:<facility>]] This causes the entity's logging messages to go to the system log. The severity argument specifies the default severity of system log messages. This may be any of the following severities supported by the syslog(3) call minus the LOG_ prefix: LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR, LOG_WARNING, LOG_NOTICE, LOG_INFO, and LOG_DEBUG. For example, to specify LOG_CRIT severity, one would use CRIT for severity. The facility argument specifies the facility under which the messages are logged. This may be any of the following facilities supported by the syslog(3) call minus the LOG_ prefix: LOG_KERN, LOG_USER, LOG_MAIL, LOG_DAEMON, LOG_AUTH, LOG_LPR, LOG_NEWS, LOG_UUCP, LOG_CRON, and LOG_LOCAL0 through LOG_LOCAL7. If no severity is specified, the default is ERR, and if no facility is specified, the default is AUTH. In the following example, the logging messages from the KDC will go to the console and to the system log under the facility LOG_DAEMON with default severity of LOG_INFO; and the logging messages from the administrative server will be appended to the file /var/adm/kadmin.log and sent to the device /dev/tty04. [logging] kdc = CONSOLE kdc = SYSLOG:INFO:DAEMON admin_server = FILE:/var/adm/kadmin.log admin_server = DEVICE=/dev/tty04 CAPATHS SECTION Cross-realm authentication is typically organized hierarchically. This hierarchy is based on the name of the realm, which thus imposes restrictions on the choice of realm names, and on who may participate in a cross-realm authentication. A non hierarchical orgization may be used, but requires a database to construct the authentication paths between the realms. This section defines that database. A client will use this section to find the authentication path between its realm and the realm of the server. The server will use this section to verify the authentication path used be the client, by checking the transited field of the received ticket. There is a tag name for each participating realm, and each tag has subtags for each of the realms. The value of the subtags is an intermediate realm which may participate in the cross-realm authentication. The subtags may be repeated if there is more then one intermediate realm. A value of "." means that the two realms share keys directly, and no intermediate realms should be allowed to participate. There are n**2 possible entries in this table, but only those entries which will be needed on the client or the server need to be present. The client needs a tag for its local realm, with subtags for all the realms of servers it will need to authenticate with. A server needs a tag for each realm of the clients it will serve. For example, ANL.GOV, PNL.GOV, and NERSC.GOV all wish to use the ES.NET realm as an intermediate realm. ANL has a sub realm of TEST.ANL.GOV which will authenticate with NERSC.GOV but not PNL.GOV. The [capath] section for ANL.GOV systems would look like this: [capaths] ANL.GOV = { TEST.ANL.GOV = . PNL.GOV = ES.NET NERSC.GOV = ES.NET ES.NET = . } TEST.ANL.GOV = { ANL.GOV = . } PNL.GOV = { ANL.GOV = ES.NET } NERSC.GOV = { ANL.GOV = ES.NET } ES.NET = { ANL.GOV = . } The [capath] section of the configuration file used on NERSC.GOV systems would look like this: [capaths] NERSC.GOV = { ANL.GOV = ES.NET TEST.ANL.GOV = ES.NET TEST.ANL.GOV = ANL.GOV PNL.GOV = ES.NET ES.NET = . } ANL.GOV = { NERSC.GOV = ES.NET } PNL.GOV = { NERSC.GOV = ES.NET } ES.NET = { NERSC.GOV = . } TEST.ANL.GOV = { NERSC.GOV = ANL.GOV NERSC.GOV = ES.NET } In the above examples, the ordering is not important, except when the same subtag name is used more then once. The client will use this to determing the path. (It is not important to the server, since the transited field is not sorted.) If this section is not present, or if the client or server cannot find a client/server path, then normal hierarchical orginization is assumed. This feature is not currently supported by DCE. DCE security servers can be used with Kerberized clients and servers, but versions prior to DCE 1.1 did not fill in the transited field, and should be used with caution. FILES /etc/krb5.conf SEE ALSO syslog(3)