fwscanf(3S)
fwscanf: fwscanf, wscanf, swscanf - convert formatted wide-character input
Showing IRIX 6.5.30 (default release). Added in IRIX 6.5.19.
NAME fwscanf: fwscanf, wscanf, swscanf - convert formatted wide-character input SYNOPSIS #include <stdio.h> #include <wchar.h> int fwscanf(FILE *stream, const wchar_t *format, ...); int wscanf(const wchar_t *format, ...); int swscanf(const char *s, const wchar_t *format, ...); DESCRIPTION fwscanf reads from the stream stream. wscanf reads from the standard input stream stdin. swscanf reads from the wide-character string *s. Each function reads wide-characters, interprets them according to a format, and stores the results in its arguments. Each expects, as arguments, a control wide-character string format described below, and a set of pointer arguments indicating where the converted input should be stored. If there are insufficient arguments for the format, the behavior is undefined. If the format is exhausted while arguments remain, the excess arguments are simply ignored. The control string usually contains conversion specifications, which are used to direct interpretation of input sequences. The control string may contain: 1. White-space wide-characters (blanks, tabs, newlines, or form- feeds) that, except in two cases described below, cause input to be read up to the next non-white-space character. 2. An ordinary wide-character (not %) that must match the next character of the input stream. 3. Conversion specifications consisting of the character % or the character sequence %digits$, an optional assignment suppression character *, a decimal digit string that specifies an optional numerical maximum field width, an optional letter l (ell), L, or h indicating the size of the receiving object, and a conversion code. The conversion wide-characters c, s and [ must be preceded by l (ell) if the corresponding argument is a pointer to wchar_t rather than a pointer to a character type. The conversion wide-characters d, i and n must be preceded by h if the corresponding argument is a pointer to short int rather than a pointer to int, or by l (ell) if it is a pointer to long int. Similarly, the conversion wide-characters o, u and x must be preceded by h if the corresponding argument is a pointer to unsigned short int rather than a pointer to unsigned int or by l (ell) if it is a pointer to unsigned long int. The conversion wide-characters e, f and g must be preceded by l (ell) if the corresponding argument is a pointer to double rather than a pointer to float, or by L if it is a pointer to long double. If an h, l (ell) or L appears with any other conversion wide- character, the behaviour is undefined. A conversion wide-character specification directs the conversion of the next input field; the result is placed in the variable pointed to by the corresponding argument unless assignment suppression was indicated by the character *. The suppression of assignment provides a way of describing an input field that is to be skipped. An input field is defined as a string of non-space wide-characters; it extends to the next inappropriate wide-character or until the maximum field width, if one is specified, is exhausted. For all descriptors except the character [ and the character c, white space leading an input field is ignored. Conversions can be applied to the nth argument in the argument list, rather than to the next unused argument. In this case, the conversion character % (see above) is replaced by the sequence %digits$ where digits is a decimal integer n, giving the position of the argument in the argument list. The first such argument, %1$, immediately follows format. The control string can contain either form of a conversion specification, i.e., % or %digits$, although the two forms cannot be mixed within a single control string. The conversion code indicates the interpretation of the input field; the corresponding pointer argument must usually be of a restricted type. For a suppressed field, no pointer argument is given. The following conversion codes are valid: % A single % is expected in the input at this point; no assignment is done. d Matches an optionally signed decimal integer, whose format is the same as expected for the subject sequence of the wcstol function with the value 10 for the base argument. The corresponding argument should be a pointer to integer. u Matches an optionally signed decimal integer, whose format is the same as expected for the subject sequence of the wcstoul function with the value 10 for the base argument. The corresponding argument should be a pointer to unsigned integer. o Matches an optionally signed octal integer, whose format is the same as expected for the subject sequence of the wcstoul function with the value 8 for the base argument. The corresponding argument should be a pointer to unsigned integer. x Matches an optionally signed hexadecimal integer, whose format is the same as expected for the subject sequence of the wcstoul function with the value 16 for the base argument. The corresponding argument should be a pointer to unsigned integer. i Matches an optionally signed integer, whose format is the same as expected for the subject sequence of the wcstol function with the value 0 for the base argument. The corresponding argument should be a pointer to integer. n No input is consumed. The corresponding argument should be a pointer to integer into which is to be written the number of characters read from the input stream so far by the call to the function. Execution of a %n directive does not increment the assignment count returned at the completion of execution of the function. e,f,g Matches an optionally signed floating point number, whose format is the same as expected for the subject string of the wcstod function. In the absence of a size modifier, the corresponding argument must be a pointer to float. If the fwprintf() family of functions generates character string representations for infinity and NaN (a 7858 symbolic entity encoded in floating-point format) to support the ANSI/IEEE Std 754:1985 standard, the fwscanf() family of functions will recognise them as input. s Matches a sequence of non white-space wide-characters. If no l (ell) qualifier is present, characters from the input field are converted as if by repeated calls to the wcrtomb() function, with the conversion state described by an mbstate_t object initialised to zero before the first wide-character is converted. The corresponding argument must be a pointer to a character array large enough to accept the sequence and the terminating null character, which will be added automatically. Otherwise, the corresponding argument must be a pointer to an array of wchar_t large enough to accept the sequence and the terminating null wide-character, which will be added automatically. S Same as ls c Matches a sequence of wide-characters of the number specified by the field width (1 if no field width is present in the conversion specification). If no l (ell) qualifier is present, wide-characters from the input field are converted as if by repeated calls to the wcrtomb() function, with the conversion state described by an mbstate_t object initialised to zero before the first wide-character is converted. The corresponding argument must be a pointer to a character array large enough to accept the sequence. No null character is added. Otherwise, the corresponding argument must be a pointer to an array of wchar_t large enough to accept the sequence. No null wide-character is added. The normal skip over white space is suppressed. C Same as lc [ Matches a nonempty sequence of characters from a set of expected characters (the scanset). The corresponding argument should be a pointer to the initial character of an array large enough to accept the sequence and a terminating null character, which will be added automatically. The conversion specifier includes all subsequent characters in the format string, up to and including the matching right bracket (]). The characters between the brackets (the scanlist) comprise the scanset, unless the character after the left bracket is a circumflex (^), in which case the scanset contains all characters that do not appear in the scanlist between the circumflex and the right bracket. If the conversion specifier begins with [] or [^], the right bracket character is in the scanlist and the next right bracket character is the matching right bracket that ends the specification; otherwise the first right bracket character is the one that ends the specification. A range of characters in the scanset may be represented by the construct first - last; thus [0123456789] may be expressed [0-9]. Using this convention, first must be lexically less than or equal to last, or else the dash will stand for itself. The character - will also stand for itself whenever it is the first or the last character in the scanlist. To include the right bracket as an element of the scanset, it must appear as the first character (possibly preceded by a circumflex) of the scanlist and in this case it will not be syntactically interpreted as the closing bracket. At least one character must match for this conversion to be considered successful. p Matches an implementation-defined set of sequences, which should be the same as the set of sequences that may be produced by the %p conversion of the fwprintf function. The corresponding argument should be a pointer to void. The interpretation of the input item is implementation-defined. If the input item is a value converted earlier during the same program execution, the pointer that results shall compare equal to that value; otherwise, the behavior of the %p conversion is undefined. If an invalid conversion character follows the %, the results of the operation may not be predictable. The conversion specifiers E, G, and X are also valid and behave the same as e, g, and x, respectively. Each function allows for detection of a language-dependent decimal-point character in the input string. The decimal-point character is defined by the program's locale (category LC_NUMERIC). In the "C" locale, or in a locale where the decimal-point character is not defined, the decimal- point character defaults to a period (.). If end-of-file is encountered during input, conversion is terminated. If end-of-file occurs before any wide-characters matching the current conversion specification (except for %n) have been read (other than leading white-space, where permitted), execution of the current conversion specification terminates with an input failure. Otherwise, unless execution of the current conversion specification is terminated with a matching failure, execution of the following conversion specification (if any) is terminated with an input failure. Reaching the end of the string in swscanf() is equivalent to encountering end-of-file for fwscanf(). If conversion terminates on a conflicting input character, the offending input character is left unread in the input stream. Trailing white space (including newline characters) is left unread unless matched by a directive. The success of literal matches and suppressed assignments is not directly determinable other than via the %n directive. The fwscanf() and wscanf() functions may mark the st_atime field of the file associated with stream for update. The st_atime field will be marked for update by the first successful execution of fgetc(), fgetwc(), fgets(), fgetws(), fread(), getc(), getwc(), getchar(), getwchar(), gets(), fscanf() or fwscanf() using stream that returns data not supplied by a prior call to ungetc(). EXAMPLES The call to the function wscanf: int i, n; float x; char name[50]; n = wscanf (L"%d%f%s", &i, &x, name); with the input line: 25 54.32E-1 thompson will assign to n the value 3, to i the value 25, to x the value 5.432, and name will contain thompson\0. The call to the function wscanf: int i; float x; char name[50]; (void) wscanf (L"%2d%f%*d %[0-9]", &i, &x, name); with the input line: 56789 0123 56a72 will assign 56 to i, 789.0 to x, skip 0123, and place the characters 56\0 in name. The next character read from stdin will be a. NOTES These functions are supported in n32 and 64 bit C Libraries for IRIX 6.5.17 and later versions. SEE ALSO getwc(3S), fwprintf(3S), setlocale(3C), wctomb(3C), wcstod(3S), wcstol(3S), wcstoul(3S), langinfo(5), stdio(3S). DIAGNOSTICS These routines return the number of successfully matched and assigned input items; this number can be zero in the event of an early matching failure between an input character and the control string. If the input ends before the first matching failure or conversion, EOF is returned. In addition, all forms of fwscanf() may fail if: [EILSEQ] Input byte sequence does not form a valid character. [EINVAL] There are insufficient arguments.